7:26:16]
-load code from file <d:\nvt\.\nvadial.nve>  - 19811 instructions, version: 6.0

[d:\nvt\.\nvadial] Start of module [nvadial]
[d:\nvt\.\nvadial] 17:26:16:90
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Used module for: CAPI
[d:\nvt\.\nvadial] Active escalation level: 0
[d:\nvt\.\nvadial] Max life time of post job: 720 minutes
[d:\nvt\.\nvadial] Post job delay: 224433
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] WARNING: Job is too old an will be canceled
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Dial job for 111 - 111 is too old and was canceled. Max life
time of 720 minutes for job exeeded
-load code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set time ti1 to: 172617
[nvawrdb] Set date to: 14052011
[nvawrdb] Set status to: 10
[nvawrdb] Write status 10 to dbentry 0
[nvawrdb] Found entry in first number
[nvawrdb] First number dialed
[nvawrdb] Set time ti1 to: 172617
[nvawrdb] Set status for to1 to: 10
[nvawrdb] Set substatus to:
[nvawrdb] Do not increment call entry in db for status: 10
[nvawrdb] Set counter to: 1
[nvawrdb] Write call status job file:
[nvawrdb] Phone type: INT
[nvawrdb] Done
free code for nvawrdb
wrj-hangup: rc=1 Cleanup(0..212) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[14.05 17:26:17]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [14.05 17:26:17]
inibase...
ini-base not present.
done
::
please dial the application on line  3    3
Call offered (0301:00000501)

answer call...> waiting to accept call...  8
m_ConnectB3Indication

m_ConnectB3ActiveIndication
..audio channel ready..
Incoming call from [9#71100]

[15.05 00:15:02]
-load code from file <nvastart.nve>  - 10361 instructions, version: 6.0

[nvastart] Start of module [nvastart] rev:1901
[nvastart] Used module for: CAPI
[nvastart] Use new refnumber: 4DCEFEE6 for new alarm
[nvastart] Ref Number: 4DCEFEE6
[nvastart] Alarm log file: d:\nvt\log\.\4DCEFEE6.log
<d:\nvt\.\nvawritelogsections.nve> nvt-program non existent
[nvastart] INT_Phone (DDI): 9#2010
[nvastart] EXT_Phone (CLI): 9#71100
[nvastart] OWN_PHONE:   9#2010
[nvastart] PHONETYPE:   0
[nvastart] CALLER NAME: User1100lang Vor
[nvastart] CALL ID:
-load code from file <nvaddipreprocessing.nve>  - 604 instructions, version: 6.0


[nvaddipreprocessing] Start nvaddipreprocessing module
[nvaddipreprocessing] DDILocDecodingActive from the section [nvaddipreprocessing
] in nvalarm.ini is set to 0
[nvaddipreprocessing] No DDI decoding required - return to nvastart
[nvaddipreprocessing] Mode: CAPI
[nvaddipreprocessing] Check if prefix is removed from DDI
[nvaddipreprocessing] DDI Length: 6
[nvaddipreprocessing] Check if Alcatel DECT Call with 6 digit DDI
free code for nvaddipreprocessing
-load code from file <nvaddiconv.nve>  - 1799 instructions, version: 6.0

[nvaddiconv] Start of module [nvaddiconv]
[nvaddiconv] No DDI conversion active -> return
free code for nvaddiconv
-load code from file <nvacliconv.nve>  - 258 instructions, version: 6.0

[nvacliconv] Start of module [nvacliconv]
free code for nvacliconv
-load code from file <nvaddimapping.nve>  - 227 instructions, version: 6.0

[nvaddimapping] DDI converter with mapping table
[nvaddimapping] Get DDI for 9#2010 from nvaddimapping.ini
[nvaddimapping] New DDI :1000
free code for nvaddimapping
-load code from file <nvaclimapping.nve>  - 252 instructions, version: 6.0

[nvaclimapping] CLI converter with mapping table
[nvaclimapping] Get CLI for 9#71100 from nvaclimapping.ini
[nvaclimapping] No mapping for CLI defined -> return
free code for nvaclimapping
-load code from file <nvaddiclialr.nve>  - 1596 instructions, version: 6.0

[nvaddiclialr] Start of module [nvaddiclialr]
[nvaddiclialr] DDI CLI Alarm is not active -> return
free code for nvaddiclialr
<d:\nvt\.\nvautoconf.nve> nvt-program non existent
[nvastart] Schedule function acitve: 0
[nvastart] Language for incoming entry: DE
[nvastart] Set lg1 directory to language: DE
[nvastart] German -> Set to dtvox
[nvastart] Status of mailbox 1000 is : 92
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1000
[nvawhitelist] No whitelist for alarm-in 1000
free code for nvawhitelist
[nvastart] In-Type of mailbox 1000 is : 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 1000
free code for nvasetlg
[nvastart] Specified alarm for CLI 9#71100 =
[nvastart] process cmd: nve nvasql_incoming 1 -s29#2010 -s34DCEFEE6 -s49#71100 -
s5User1100lang Vor -i11000 -i20 -i33 -i47900 -i50 -i90
[nvastart] Distribution with alarmkey: 7900
-load code from file <nvadist.nve>  - 3986 instructions, version: 6.0

[nvadist] Start of module [nvadist]
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1000
[nvawhitelist] No whitelist for alarm-in 1000
free code for nvawhitelist
[nvadist] Record alarmmessage: 1
[nvadist] Module: CAPI
[nvadist] Set record before launch to 1 because of CAPI
[nvadist] Record messsage before launching alarm: 1
[nvadist] Play voxfile v1000_1.vox of alarm-in box
file d:\dbv1\v1000_1.wav not found
file d:\dbv1\vm1000_1.wav not found
[nvadist] No message found for the alarm-in key: 1000
file d:\dbv1\v100x_1.wav not found
file d:\dbv1\v10xx_1.wav not found
[nvadist] Alarmin message v10xx_1.vox was not found
file d:\dbv1\v1xxx_1.wav not found
[nvadist] Play  please speak after the beep as default -> no alarmmessage found
play \dtvox\nvadist.wav (wave): 8 seconds: ...play= \dtvox\nvadist.wav[0] ... st
d
  6..done playin  5[nvadist] Start recordig filename before launching alarm :4DC
EFEE6.wav  for max. 600 1/10 sec
play d:\dtvox\peepton.wav (wave): 0 seconds: ...play= d:\dtvox\peepton.wav[0] ..
. std
..done playin  0record wave: q: 3> recording d:\dbv1\4dcefee6.wav... 61/  5 disc
 info indication (4)

m_InterruptConnection 1

m_DisconnectB3Indication

m_DisconnectB3ConfirmationBad [0501]

Call disconnected (00000501)

 caller disconnected
Fastbusy detected
[nvadist] Check if recorded alarmmessage size is larger then: 5000
[nvadist] Current size of file 4DCEFEE6.wav :47616
-load code from file <nvasetlaunchedby.nve>  - 192 instructions, version: 6.0

[nvasetlaunchedby] Caller 9#71100 has launched alarm
[nvasetlaunchedby] No SIP call -> add full caller name to launched by
[nvasetlaunchedby] Launched by: Tel_9#71100-User1100lang_Vor
free code for nvasetlaunchedby
[nvadist] Start alarm for key 7900 with filename 4DCEFEE6.wav
[nvadist] start cmd: nvadist.bat 7900 4DCEFEE6 4DCEFEE6.wav "Tel_9#71100-User110
0lang_Vor" 1000
 maxwait: 1 sec.. exited (0)
[nvadist] st: 0
[nvadist] Check for entry specific wav file: \dtvox\.\nvaalrgo_1000.wav
file \dtvox\nvaalrgo_1000.wav not found
 caller disconnected
Fastbusy detected
wrj-hangup: rc=1 Cleanup(0..318) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[15.05 00:15:12]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 00:15:12]

03 now dial the application on line  3    4

















ini-base not present.
done

[15.05 00:15:17]
-load code from file <d:\nvt\.\nvadial.nve>  - 19811 instructions, version: 6.0

[d:\nvt\.\nvadial] Start of module [nvadial]
[d:\nvt\.\nvadial] 00:15:17:54
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Used module for: CAPI
[d:\nvt\.\nvadial] Active escalation level: 0
[d:\nvt\.\nvadial] Max life time of post job: 720 minutes
[d:\nvt\.\nvadial] Post job delay: 5
[d:\nvt\.\nvadial] Open DB 4DCEFEE6.dbf with entry: 0
[d:\nvt\.\nvadial] Language:
[d:\nvt\.\nvadial] No valid language defined for person
[d:\nvt\.\nvadial] DB Top: 1
[d:\nvt\.\nvadial] Db skip to entry 7901: 1
nvt-warning: string longer than fieldlength [1], loss of data possible
[d:\nvt\.\nvadial] Special ringtone: 0
[d:\nvt\.\nvadial] Use intrusion:    0
[d:\nvt\.\nvadial] Repeat message:   2
[d:\nvt\.\nvadial] PBX specific protocol: ABC
[d:\nvt\.\nvadial] Confirmation after message is played
[d:\nvt\.\nvadial] Alarmtype= 0
[d:\nvt\.\nvadial] Alarmtype: 0  start conference= 0
[d:\nvt\.\nvadial] Dynamic confirmation type:
[d:\nvt\.\nvadial] Confirmation type: 0
[d:\nvt\.\nvadial] Send UUI: 1
[d:\nvt\.\nvadial] UUI type: 0
[d:\nvt\.\nvadial] Dialexit active: 0
[d:\nvt\.\nvadial] Activate dial exit if alarm is canceled
[d:\nvt\.\nvadial] Redial to send 2nd message to DCT: 0
[d:\nvt\.\nvadial] No broadcast is active
[d:\nvt\.\nvadial] Camp on Busy:    0
[d:\nvt\.\nvadial] Start conference before dialout: 0
[d:\nvt\.\nvadial] CSTA Auto Answer: 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 7900
free code for nvasetlg
[d:\nvt\.\nvadial] s5: 4DCEFEE6.wav
[d:\nvt\.\nvadial] Check phonetype: INT
[d:\nvt\.\nvadial] Internal call to 1101
[d:\nvt\.\nvadial] No camp on busy active
[d:\nvt\.\nvadial] No special ringtone active
[d:\nvt\.\nvadial] No intrusion
[d:\nvt\.\nvadial] No broadcast
[d:\nvt\.\nvadial] Check if popup is started: 0
[d:\nvt\.\nvadial] Done with special dialstring commands: 1101
-load code from file <nvadisp.nve>  - 800 instructions, version: 6.0

[nvadisp] Start of module [nvadisp]
[nvadisp] Do not send ownphone
free code for nvadisp
-load code from file <nvalduui.nve>  - 1694 instructions, version: 6.0

[nvalduui] [Start UUI Modul]
[nvalduui] Rule type for UUI: 0
[nvalduui] Use message from logfile under [Alarm] SMSPagerUUIMessage=BRANDALARM-
Zusatinfo1
[nvalduui] Original groupnumber: 12
-load code from file <nvamsgreplace.nve>  - 824 instructions, version: 6.0

[nvamsgreplace] Max string size defined in nvt.ini [CONFIGURATION] stringsize=10
24
[nvamsgreplace] strstr for nvt_ext_phone st: -1
[nvamsgreplace] No caller-number exchange
[nvamsgreplace] strstr for nvt_call_name st: -1
[nvamsgreplace] No caller-name exchange
[nvamsgreplace] Cut leading blanks
free code for nvamsgreplace
free code for nvalduui
-load code from file <nvaldmsg.nve>  - 4868 instructions, version: 6.0

[nvaldmsg] [Start nvaldmsg Modul]
[nvaldmsg] Rule type for msg 1: 0
[nvaldmsg] Rule type for msg 2: 0
[nvaldmsg] Alarm specific CLI:
_access: \nvt\log.\4DCEFEE6.msg return state: -1
[nvaldmsg] Dynamic disp message 1:
[nvaldmsg] Original groupnumber: 12
[nvaldmsg] Get messagetext from nvamsg1.ini field 7900
-load code from file <nvamsgreplace.nve>  - 824 instructions, version: 6.0

[nvamsgreplace] Max string size defined in nvt.ini [CONFIGURATION] stringsize=10
24
[nvamsgreplace] strstr for nvt_ext_phone st: -1
[nvamsgreplace] No caller-number exchange
[nvamsgreplace] strstr for nvt_call_name st: -1
[nvamsgreplace] No caller-name exchange
[nvamsgreplace] Cut leading blanks
free code for nvamsgreplace
[nvaldmsg] Add ddi for callback: 0
[nvaldmsg] No alarm callback code
[nvaldmsg] Send first 16 digits of 1st alarmmessage
[nvaldmsg] Message before answer: BRAND-Zusatinfo1
[nvaldmsg] Message1: BRAND-Zusatinfo1
_access: \nvt\log.\4DCEFEE6.msg return state: -1
[nvaldmsg] Dynamic disp message 2:
[nvaldmsg] Show second message on answer
-load code from file <nvamsgreplace.nve>  - 824 instructions, version: 6.0

[nvamsgreplace] Max string size defined in nvt.ini [CONFIGURATION] stringsize=10
24
[nvamsgreplace] strstr for nvt_ext_phone st: -1
[nvamsgreplace] No caller-number exchange
[nvamsgreplace] strstr for nvt_call_name st: -1
[nvamsgreplace] No caller-name exchange
[nvamsgreplace] Cut leading blanks
free code for nvamsgreplace
[nvaldmsg] Send first 16 digits of 2nd alarmmessage
[nvaldmsg] Message after answer: BRAND-Zusatinfo1
[nvaldmsg] Add both messages to own_phone seperated by 
[nvaldmsg] Display message:BRAND-Zusatinfo1BRAND-Zusatinfo1
free code for nvaldmsg
[d:\nvt\.\nvadial] ISDN connection -> no need to go offhook
-load code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set time ti1 to: 001517
[nvawrdb] Set date to: 15052011
[nvawrdb] Set status to: 6
[nvawrdb] Write status 6 to dbentry 0
[nvawrdb] Field 1 is acitve
[nvawrdb] First number dialed
[nvawrdb] Set time ti1 to: 001517
[nvawrdb] Set status for to1 to: 6
[nvawrdb] Set status dialing -> return
free code for nvawrdb
[d:\nvt\.\nvadial] Time before dial: 4DCEFEF5
[d:\nvt\.\nvadial] Time before dial: 00:15:17
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Dial exit active
[d:\nvt\.\nvadial] start dial 1101 and wait for 8 rings  Msg: BRAND-Zusatinfo1B
RAND-Zusatinfo1 UUI: BRANDALARM-Zusatinfo1
capi_MakeCall: initiating call to 1101
wait for signal...done
>e1-outdialing 1101 [00004801]...ignoring <ALCATEL RO_CLASSMARKS> facility.
ignoring <ECMA RO_CALLED_NAME> facility.
..alerting event..sending alerting message : BRAND-Zusatinfo1
     7ignoring <ALCATEL RO_CLASSMARKS> facility.
ignoring <ECMA RO_CONNECTED_NAME> facility.

m_ConnectB3ActiveIndication
..audio channel ready..
m_ConnectB3ConfirmationOk [4801]
R[00004801]
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Callresult: 1
[d:\nvt\.\nvadial] nvt_st    : 9#71101
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Time after dial: 00:15
[d:\nvt\.\nvadial] Get time for dial between 4DCEFEF5 and 4DCEFEFF
[d:\nvt\.\nvadial] Time for dialing: 10
[d:\nvt\.\nvadial] >15.05,00:15,2,Test1101,1101,4DCEFEE6,INT,1,0,12,7900,4DCEFEE
6.wav,
-load code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set time ti1 to: 001527
[nvawrdb] Set date to: 15052011
[nvawrdb] Set status to: 1
[nvawrdb] Write status 1 to dbentry 0
[nvawrdb] Field 1 is acitve
[nvawrdb] First number dialed
[nvawrdb] Set time ti1 to: 001527
[nvawrdb] Set status for to1 to: 1
[nvawrdb] Set substatus to: 9#71101
[nvawrdb] Increment calls to: 1
[nvawrdb] Set counter to: 1
[nvawrdb] Write call status job file:
[nvawrdb] Phone type: INT
[nvawrdb] Done
free code for nvawrdb
<d:\nvt\.\nvafname.nve> nvt-program non existent
[d:\nvt\.\nvadial] Use dir to play messages: d:\dbv1\
[d:\nvt\.\nvadial] Play own message: 0
_access: d:\dbv1\.\4DCEFEE6.wav return state: 0
[d:\nvt\.\nvadial] Message defined in s5 -> play defined message: 4DCEFEE6.wav
[d:\nvt\.\nvadial] No Infotext
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Set dial exit for number 1101 to: 1
-load code from file <nvasql_call.nve>  - 4272 instructions, version: 6.0

[nvasql_call] Alarm log: d:\nvt\log\.\4DCEFEE6.log
[nvasql_call] Type of alarm: alr
[nvasql_call] Write jobfile:  1
[nvasql_call] Jobfile path:   \nvt\nvawdir\sqljob
[nvasql_call] Use ODBC:       0
[nvasql_call] Use database:   nv_alarm_exec
[nvasql_call] Call table:     execute_data
[nvasql_call] Username:  NVUSER
[nvasql_call] Password:  NVM
[nvasql_call] Servername: LKM-AM-ALR1
[nvasql_call] SQL Command Type: 2
part to replace <'> not foundstringlength is / are too shortpart to replace <'>
not foundstringlength is / are too shortpart to replace <'> not foundstringlengt
h is / are too short[nvasql_call] Open alarm group db: d:\nvt\log\.\4DCEFEE6.dbf

[nvasql_call] Only insert first part -> update later
_access: \nvt\nvawdir\sqljob.\nv_alarm_exec\INSERT_LKM-AM-ALR1_4DCEFEE6_0_1.job
return state: -1
[nvasql_call] Write SQL command to jobfile: \nvt\nvawdir\sqljob.\nv_alarm_exec\I
NSERT_LKM-AM-ALR1_4DCEFEE6_0_1.job
free code for nvasql_call
[d:\nvt\.\nvadial] Evaktext found: -1
-load code from file <nvapersspec.nve>  - 1105 instructions, version: 6.0

[nvapersspec] Start of module [nvapersspec]
free code for nvapersspec
-load code from file <nvapremsg.nve>  - 1919 instructions, version: 6.0

[nvapremsg] Start of module [nvapremsg]
[nvapremsg] Used module for: CAPI
[nvapremsg] Pre-Message for alarm 7900 from db:
[nvapremsg] No Pre-message specified in db -> check ini nvapremsg.ini [PreMessag
es] 7900=
[nvapremsg] Pre-message from ini for alarm 7900 is:
[nvapremsg] No pre-message defined for 7900
free code for nvapremsg
[d:\nvt\.\nvadial] Current call status: 1
[d:\nvt\.\nvadial] Connect, play message d:\dbv1\.\4DCEFEE6.wav for 2 time(s)
play d:\dbv1\4dcefee6.wav (wave): 5 seconds: ...play= d:\dbv1\4dcefee6.wav[0] ..
. std
  2 disc info indication (3)

m_InterruptConnection 1

m_DisconnectB3Indication

m_DisconnectB3ConfirmationBad [4801]

Call disconnected (00004801)
 caller disconnected
Fastbusy detected
[d:\nvt\.\nvadial] message played: 4DCEFEE6.wav
<d:\nvt\.\nvamore.nve> nvt-program non existent
[d:\nvt\.\nvadial] Caller went onhook -> do not repeat anymore
[d:\nvt\.\nvadial]
-load code from file <nvareport.nve>  - 915 instructions, version: 6.0

[nvareport] Write to CSV active: 0
[nvareport] Write report to CSV file: d:\nvt\log\.\nvareport.csv
[nvareport] CSV Separator: ,
[nvareport] No CSV file written -> not activated in inifile nvalarm.ini [nvarepo
rt]
free code for nvareport
[d:\nvt\.\nvadial] do not start conference, as alarmtype= 0
<d:\nvt\.\nvakey.nve> nvt-program non existent
[d:\nvt\.\nvadial] Dialing next number: 0
[d:\nvt\.\nvadial] Get time for call between 4DCEFEFF and 4DCEFF04
[d:\nvt\.\nvadial] Length of call: 5
-load code from file <nvasql_call.nve>  - 4272 instructions, version: 6.0

[nvasql_call] Alarm log: d:\nvt\log\.\4DCEFEE6.log
[nvasql_call] Type of alarm: alr
[nvasql_call] Write jobfile:  1
[nvasql_call] Jobfile path:   \nvt\nvawdir\sqljob
[nvasql_call] Use ODBC:       0
[nvasql_call] Use database:   nv_alarm_exec
[nvasql_call] Call table:     execute_data
[nvasql_call] Username:  NVUSER
[nvasql_call] Password:  NVM
[nvasql_call] Servername: LKM-AM-ALR1
[nvasql_call] SQL Command Type: 3
part to replace <'> not foundstringlength is / are too shortpart to replace <'>
not foundstringlength is / are too shortpart to replace <'> not foundstringlengt
h is / are too short[nvasql_call] Open alarm group db: d:\nvt\log\.\4DCEFEE6.dbf

[nvasql_call] Update sencond part of call data
_access: \nvt\nvawdir\sqljob.\nv_alarm_exec\UPDATE_LKM-AM-ALR1_4DCEFEE6_0_1.job
return state: -1
[nvasql_call] Write SQL command to jobfile: \nvt\nvawdir\sqljob.\nv_alarm_exec\U
PDATE_LKM-AM-ALR1_4DCEFEE6_0_1.job
free code for nvasql_call
[d:\nvt\.\nvadial] Confirmation return:
[d:\nvt\.\nvadial] Done, end of alarm dialout - successfull
-load code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set done flag to: 1
free code for nvawrdb
wrj-hangup: rc=1 Cleanup(0..223) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[15.05 00:15:32]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 00:15:32]
inibase...
ini-base not present.
done
::
02 now dial the application on line  2    5










































answer call...
[14.05 17:26:17]
-load code from file <d:\nvt\.\nvadial.nve>  - 19811 instructions, version: 6.0

[d:\nvt\.\nvadial] Start of module [nvadial]
[d:\nvt\.\nvadial] 17:26:17:00
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Used module for: CAPI
[d:\nvt\.\nvadial] Active escalation level: 0
[d:\nvt\.\nvadial] Max life time of post job: 720 minutes
[d:\nvt\.\nvadial] Post job delay: 202803
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] WARNING: Job is too old an will be canceled
[d:\nvt\.\nvadial]
[d:\nvt\.\nvadial] Dial job for 111 - 111 is too old and was canceled. Max life
time of 720 minutes for job exeeded
-load code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set time ti1 to: 172618
[nvawrdb] Set date to: 14052011
[nvawrdb] Set status to: 10
[nvawrdb] Write status 10 to dbentry 0
[nvawrdb] Found entry in first number
[nvawrdb] First number dialed
[nvawrdb] Set time ti1 to: 172618
[nvawrdb] Set status for to1 to: 10
[nvawrdb] Set substatus to:
[nvawrdb] Do not increment call entry in db for status: 10
[nvawrdb] Set counter to: 1
[nvawrdb] Write call status job file:
[nvawrdb] Phone type: INT
[nvawrdb] Done
free code for nvawrdb
wrj-hangup: rc=1 Cleanup(0..212) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[14.05 17:26:18]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [14.05 17:26:18]
inibase...
ini-base not present.
done
::
04 now dial the application on line  4    3
Call offered (0401:00000701)

answer call...> waiting to accept call...  8
m_ConnectB3Indication

m_ConnectB3ActiveIndication
..audio channel ready..
Incoming call from [1100]

[15.05 00:55:06]
-load code from file <nvastart.nve>  - 10361 instructions, version: 6.0

[nvastart] Start of module [nvastart] rev:1901
[nvastart] Used module for: CAPI
[nvastart] Use new refnumber: 4DCF084A for new alarm
[nvastart] Ref Number: 4DCF084A
[nvastart] Alarm log file: d:\nvt\log\.\4DCF084A.log
<d:\nvt\.\nvawritelogsections.nve> nvt-program non existent
[nvastart] INT_Phone (DDI): 6#66
[nvastart] EXT_Phone (CLI): 1100
[nvastart] OWN_PHONE:   6#66
[nvastart] PHONETYPE:   0
[nvastart] CALLER NAME: User1100lang Vor
[nvastart] CALL ID:
-load code from file <nvaddipreprocessing.nve>  - 604 instructions, version: 6.0


[nvaddipreprocessing] Start nvaddipreprocessing module
[nvaddipreprocessing] DDILocDecodingActive from the section [nvaddipreprocessing
] in nvalarm.ini is set to 0
[nvaddipreprocessing] No DDI decoding required - return to nvastart
[nvaddipreprocessing] Mode: CAPI
[nvaddipreprocessing] Check if prefix is removed from DDI
[nvaddipreprocessing] DDI Length: 4
[nvaddipreprocessing] Check if Alcatel DECT Call with 4 digit DDI
free code for nvaddipreprocessing
-load code from file <nvaddiconv.nve>  - 1799 instructions, version: 6.0

[nvaddiconv] Start of module [nvaddiconv]
[nvaddiconv] No DDI conversion active -> return
free code for nvaddiconv
-load code from file <nvacliconv.nve>  - 258 instructions, version: 6.0

[nvacliconv] Start of module [nvacliconv]
free code for nvacliconv
-load code from file <nvaddimapping.nve>  - 227 instructions, version: 6.0

[nvaddimapping] DDI converter with mapping table
[nvaddimapping] Get DDI for 6#66 from nvaddimapping.ini
[nvaddimapping] New DDI :66
free code for nvaddimapping
-load code from file <nvaclimapping.nve>  - 252 instructions, version: 6.0

[nvaclimapping] CLI converter with mapping table
[nvaclimapping] Get CLI for 1100 from nvaclimapping.ini
[nvaclimapping] No mapping for CLI defined -> return
free code for nvaclimapping
-load code from file <nvaddiclialr.nve>  - 1596 instructions, version: 6.0

[nvaddiclialr] Start of module [nvaddiclialr]
[nvaddiclialr] DDI CLI Alarm is not active -> return
free code for nvaddiclialr
<d:\nvt\.\nvautoconf.nve> nvt-program non existent
[nvastart] Schedule function acitve: 0
[nvastart] Language for incoming entry: DE
[nvastart] Set lg1 directory to language: DE
[nvastart] German -> Set to dtvox
[nvastart] Status of mailbox 66 is : 92
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 66
[nvawhitelist] No whitelist for alarm-in 66
free code for nvawhitelist
[nvastart] In-Type of mailbox 66 is : 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 66
free code for nvasetlg
[nvastart] Specified alarm for CLI 1100 =
[nvastart] process cmd: nve nvasql_incoming 1 -s26#66 -s34DCF084A -s41100 -s5Use
r1100lang Vor -i166 -i20 -i34 -i47509 -i50 -i90
[nvastart] Distribution with alarmkey: 7509
-load code from file <nvadist.nve>  - 4172 instructions, version: 6.0

[nvadist] Start of module [nvadist]
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 66
[nvawhitelist] No whitelist for alarm-in 66
free code for nvawhitelist
[nvadist] Record alarmmessage: 1
[nvadist] Module: CAPI
[nvadist] Set record before launch to 1 because of CAPI
[nvadist] Record messsage before launching alarm: 1
[nvadist] Start call back to play recorded message: 1
[nvadist] Play voxfile v66_1.vox of alarm-in box
file d:\dbv1\v66_1.wav not found
file d:\dbv1\vm66_1.wav not found
[nvadist] No message found for the alarm-in key: 66
file d:\dbv1\v66x_1.wav not found
file d:\dbv1\v66xx_1.wav not found
[nvadist] Alarmin message v66xx_1.vox was not found
file d:\dbv1\v6xxx_1.wav not found
[nvadist] Play  please speak after the beep as default -> no alarmmessage found
play \dtvox\nvadist.wav (wave): 8 seconds: ...play= \dtvox\nvadist.wav[0] ... st
d
  6..done playin  5[nvadist] Start recordig filename before launching alarm :4DC
F084A.wav  for max. 600 1/10 sec
play d:\dtvox\peepton.wav (wave): 0 seconds: ...play= d:\dtvox\peepton.wav[0] ..
. std
..done playin  0record wave: q: 3> recording d:\dbv1\4dcf084a.wav... 61/  4 disc
 info indication (4)

m_InterruptConnection 1

m_DisconnectB3Indication

m_DisconnectB3ConfirmationBad [0701]

Call disconnected (00000701)

 caller disconnected
Fastbusy detected
[nvadist] Check if recorded alarmmessage size is larger then: 5000
[nvadist] Current size of file 4DCF084A.wav :37376
-load code from file <nvasetlaunchedby.nve>  - 192 instructions, version: 6.0

[nvasetlaunchedby] Caller 1100 has launched alarm
[nvasetlaunchedby] No SIP call -> add full caller name to launched by
[nvasetlaunchedby] Launched by: Tel_1100-User1100lang_Vor
free code for nvasetlaunchedby
[nvadist] Start alarm for key 7509 with filename 4DCF084A.wav
[nvadist] start cmd: nvadist.bat 7509 4DCF084A 4DCF084A.wav "Tel_1100-User1100la
ng_Vor" 66
 maxwait: 1 sec.. exited (0)
[nvadist] st: 0
[nvadist] Check for entry specific wav file: \dtvox\.\nvaalrgo_66.wav
file \dtvox\nvaalrgo_66.wav not found
 caller disconnected
Fastbusy detected
wrj-hangup: rc=1 Cleanup(0..318) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[15.05 00:55:15]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 00:55:15]

04 now dial the application on line  4    4

































ad code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set time ti1 to: 172618
[nvawrdb] Set date to: 14052011
[nvawrdb] Set status to: 10
[nvawrdb] Write status 10 to dbentry 0
[nvawrdb] Found entry in first number
[nvawrdb] First number dialed
[nvawrdb] Set time ti1 to: 172618
[nvawrdb] Set status for to1 to: 10
[nvawrdb] Set substatus to:
[nvawrdb] Do not increment call entry in db for status: 10
[nvawrdb] Set counter to: 1
[nvawrdb] Write call status job file:
[nvawrdb] Phone type: INT
[nvawrdb] Done
free code for nvawrdb
wrj-hangup: rc=1 Cleanup(0..212) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[14.05 17:26:18]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [14.05 17:26:18]
inibase...
ini-base not present.
done
::
please dial the application on line  8    2set..x..dig..boot..open..Line 8 opene
d [00000801]
done
Line 8 started
opening view_file .d:\nvt\tel\.\TEL8.DAT.
batch-programs through <d:\nvt\.\nvtbatch> activated (factor= 0)
post-job-programs through <d:\nvt\.\nvtpost>polling for jobs activated
nvtpostX.dbf:1:ON2:ON3:ON4:ON5:ON6:ON7:ON8:ON9:ON
voicemail-support through <d:\db1\vm001>

program <nvastart> as primary startup
wait-delay-factor: nvtque.exe batchlines= 0

NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 01:03:31]
please dial the application on line  8 <    1>
Call offered (0801:00004B01)

answer call...> waiting to accept call...  0
m_ConnectB3Indication

m_ConnectB3ActiveIndication
..audio channel ready..
Incoming call from [1100]

[15.05 01:05:16]
-load code from file <nvastart.nve>  - 10361 instructions, version: 6.0

[nvastart] Start of module [nvastart] rev:1901
[nvastart] Used module for: CAPI
[nvastart] Use new refnumber: 4DCF0AAC for new alarm
[nvastart] Ref Number: 4DCF0AAC
[nvastart] Alarm log file: d:\nvt\log\.\4DCF0AAC.log
<d:\nvt\.\nvawritelogsections.nve> nvt-program non existent
[nvastart] INT_Phone (DDI): 6#66
[nvastart] EXT_Phone (CLI): 1100
[nvastart] OWN_PHONE:   6#66
[nvastart] PHONETYPE:   0
[nvastart] CALLER NAME: User1100lang Vor
[nvastart] CALL ID:
-load code from file <nvaddipreprocessing.nve>  - 604 instructions, version: 6.0


[nvaddipreprocessing] Start nvaddipreprocessing module
[nvaddipreprocessing] DDILocDecodingActive from the section [nvaddipreprocessing
] in nvalarm.ini is set to 0
[nvaddipreprocessing] No DDI decoding required - return to nvastart
[nvaddipreprocessing] Mode: CAPI
[nvaddipreprocessing] Check if prefix is removed from DDI
[nvaddipreprocessing] DDI Length: 4
[nvaddipreprocessing] Check if Alcatel DECT Call with 4 digit DDI
free code for nvaddipreprocessing
-load code from file <nvaddiconv.nve>  - 1799 instructions, version: 6.0

[nvaddiconv] Start of module [nvaddiconv]
[nvaddiconv] No DDI conversion active -> return
free code for nvaddiconv
-load code from file <nvacliconv.nve>  - 258 instructions, version: 6.0

[nvacliconv] Start of module [nvacliconv]
free code for nvacliconv
-load code from file <nvaddimapping.nve>  - 227 instructions, version: 6.0

[nvaddimapping] DDI converter with mapping table
[nvaddimapping] Get DDI for 6#66 from nvaddimapping.ini
[nvaddimapping] New DDI :66
free code for nvaddimapping
-load code from file <nvaclimapping.nve>  - 252 instructions, version: 6.0

[nvaclimapping] CLI converter with mapping table
[nvaclimapping] Get CLI for 1100 from nvaclimapping.ini
[nvaclimapping] No mapping for CLI defined -> return
free code for nvaclimapping
-load code from file <nvaddiclialr.nve>  - 1596 instructions, version: 6.0

[nvaddiclialr] Start of module [nvaddiclialr]
[nvaddiclialr] DDI CLI Alarm is not active -> return
free code for nvaddiclialr
<d:\nvt\.\nvautoconf.nve> nvt-program non existent
[nvastart] Schedule function acitve: 0
[nvastart] Language for incoming entry: DE
[nvastart] Set lg1 directory to language: DE
[nvastart] German -> Set to dtvox
[nvastart] Status of mailbox 66 is : 92
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 66
[nvawhitelist] No whitelist for alarm-in 66
free code for nvawhitelist
[nvastart] In-Type of mailbox 66 is : 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 66
free code for nvasetlg
[nvastart] Specified alarm for CLI 1100 =
[nvastart] process cmd: nve nvasql_incoming 1 -s26#66 -s34DCF0AAC -s41100 -s5Use
r1100lang Vor -i166 -i20 -i38 -i47509 -i50 -i90
[nvastart] Distribution with alarmkey: 7509
-load code from file <nvadist.nve>  - 4172 instructions, version: 6.0

[nvadist] Start of module [nvadist]
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 66
[nvawhitelist] No whitelist for alarm-in 66
free code for nvawhitelist
[nvadist] Record alarmmessage: 1
[nvadist] Module: CAPI
[nvadist] Set record before launch to 1 because of CAPI
[nvadist] Record messsage before launching alarm: 1
[nvadist] Start call back to play recorded message: 1
[nvadist] Play voxfile v66_1.vox of alarm-in box
file d:\dbv1\v66_1.wav not found
file d:\dbv1\vm66_1.wav not found
[nvadist] No message found for the alarm-in key: 66
file d:\dbv1\v66x_1.wav not found
file d:\dbv1\v66xx_1.wav not found
[nvadist] Alarmin message v66xx_1.vox was not found
file d:\dbv1\v6xxx_1.wav not found
[nvadist] Play  please speak after the beep as default -> no alarmmessage found
play \dtvox\nvadist.wav (wave): 8 seconds: ...play= \dtvox\nvadist.wav[0] ... st
d
  6..done playin  5[nvadist] Start recordig filename before launching alarm :4DC
F0AAC.wav  for max. 600 1/10 sec
play d:\dtvox\peepton.wav (wave): 0 seconds: ...play= d:\dtvox\peepton.wav[0] ..
. std
..done playin  0record wave: q: 3> recording d:\dbv1\4dcf0aac.wav... 61/  5 disc
 info indication (4)

m_InterruptConnection 1

m_DisconnectB3Indication

m_DisconnectB3ConfirmationBad [4B01]

Call disconnected (00004B01)

 caller disconnected
Fastbusy detected
[nvadist] Check if recorded alarmmessage size is larger then: 5000
[nvadist] Current size of file 4DCF0AAC.wav :45568
-load code from file <nvasetlaunchedby.nve>  - 192 instructions, version: 6.0

[nvasetlaunchedby] Caller 1100 has launched alarm
[nvasetlaunchedby] No SIP call -> add full caller name to launched by
[nvasetlaunchedby] Launched by: Tel_1100-User1100lang_Vor
free code for nvasetlaunchedby
[nvadist] Start alarm for key 7509 with filename 4DCF0AAC.wav
[nvadist] start cmd: nvadist.bat 7509 4DCF0AAC 4DCF0AAC.wav "Tel_1100-User1100la
ng_Vor" 66
 maxwait: 1 sec.. exited (0)
[nvadist] st: 0
[nvadist] Check for entry specific wav file: \dtvox\.\nvaalrgo_66.wav
file \dtvox\nvaalrgo_66.wav not found
 caller disconnected
Fastbusy detected
wrj-hangup: rc=1 Cleanup(0..318) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[15.05 01:05:27]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 01:05:27]

08 now dial the application on line  8    1




























awdir\sqljob.\nv_alarm_exec\INSERT_LKM-AM-ALR1_4DCE811A_0_1.job
free code for nvasql_call
[d:\nvt\.\nvadial] Dial second number if not successfull: 0
-load code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set done flag to: 1
free code for nvawrdb
[d:\nvt\.\nvadial] END Dialout
free code for d:\nvt\.\nvadial
NORMAL TERMINATIONnvt return status: 19no client specific endup routine
[14.05 17:26:18]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [14.05 17:26:18]
inibase...
ini-base not present.
done
::
10 now dial the application on line 10    5set..x..dig..boot..open..Line 10 open
ed [00000A01]
done
Line 10 started
opening view_file .d:\nvt\tel\.\TEL10.DAT.
batch-programs through <d:\nvt\.\nvtbatch> activated (factor= 0)
post-job-programs through <d:\nvt\.\nvtpost>polling for jobs activated
nvtpostX.dbf:1:ON2:ON3:ON4:ON5:ON6:ON7:ON8:ON9:ON
voicemail-support through <d:\db1\vm001>

program <nvastart> as primary startup
wait-delay-factor: nvtque.exe batchlines= 0

NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 01:03:31]
10 now dial the application on line 10 <    1>
Call offered (0A01:00005301)

answer call...> waiting to accept call...  0
m_ConnectB3Indication

m_ConnectB3ActiveIndication
..audio channel ready..
Incoming call from [1100]

[15.05 23:48:44]
-load code from file <nvastart.nve>  - 10361 instructions, version: 6.0

[nvastart] Start of module [nvastart] rev:1901
[nvastart] Used module for: CAPI
[nvastart] Use new refnumber: 4DD04A3C for new alarm
[nvastart] Ref Number: 4DD04A3C
[nvastart] Alarm log file: d:\nvt\log\.\4DD04A3C.log
<d:\nvt\.\nvawritelogsections.nve> nvt-program non existent
[nvastart] INT_Phone (DDI): 1010
[nvastart] EXT_Phone (CLI): 1100
[nvastart] OWN_PHONE:   1010
[nvastart] PHONETYPE:   0
[nvastart] CALLER NAME: User1100lang Vor
[nvastart] CALL ID:
-load code from file <nvaddipreprocessing.nve>  - 604 instructions, version: 6.0


[nvaddipreprocessing] Start nvaddipreprocessing module
[nvaddipreprocessing] DDILocDecodingActive from the section [nvaddipreprocessing
] in nvalarm.ini is set to 0
[nvaddipreprocessing] No DDI decoding required - return to nvastart
[nvaddipreprocessing] Mode: CAPI
[nvaddipreprocessing] Check if prefix is removed from DDI
[nvaddipreprocessing] DDI Length: 4
[nvaddipreprocessing] Check if Alcatel DECT Call with 4 digit DDI
free code for nvaddipreprocessing
-load code from file <nvaddiconv.nve>  - 1799 instructions, version: 6.0

[nvaddiconv] Start of module [nvaddiconv]
[nvaddiconv] No DDI conversion active -> return
free code for nvaddiconv
-load code from file <nvacliconv.nve>  - 258 instructions, version: 6.0

[nvacliconv] Start of module [nvacliconv]
free code for nvacliconv
-load code from file <nvaddimapping.nve>  - 227 instructions, version: 6.0

[nvaddimapping] DDI converter with mapping table
[nvaddimapping] Get DDI for 1010 from nvaddimapping.ini
[nvaddimapping] No mapping for DDI defined
free code for nvaddimapping
-load code from file <nvaclimapping.nve>  - 252 instructions, version: 6.0

[nvaclimapping] CLI converter with mapping table
[nvaclimapping] Get CLI for 1100 from nvaclimapping.ini
[nvaclimapping] No mapping for CLI defined -> return
free code for nvaclimapping
-load code from file <nvaddiclialr.nve>  - 1596 instructions, version: 6.0

[nvaddiclialr] Start of module [nvaddiclialr]
[nvaddiclialr] DDI CLI Alarm is not active -> return
free code for nvaddiclialr
<d:\nvt\.\nvautoconf.nve> nvt-program non existent
[nvastart] Schedule function acitve: 0
[nvastart] Language for incoming entry: DE
[nvastart] Set lg1 directory to language: DE
[nvastart] German -> Set to dtvox
[nvastart] Status of mailbox 1010 is : 92
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1010
[nvawhitelist] No whitelist for alarm-in 1010
free code for nvawhitelist
[nvastart] In-Type of mailbox 1010 is : 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 1010
free code for nvasetlg
[nvastart] Specified alarm for CLI 1100 =
[nvastart] process cmd: nve nvasql_incoming 1 -s21010 -s34DD04A3C -s41100 -s5Use
r1100lang Vor -i11010 -i20 -i310 -i47509 -i50 -i90
[nvastart] Distribution with alarmkey: 7509
-load code from file <nvadist.nve>  - 4172 instructions, version: 6.0

[nvadist] Start of module [nvadist]
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1010
[nvawhitelist] No whitelist for alarm-in 1010
free code for nvawhitelist
[nvadist] Record alarmmessage: 1
[nvadist] Module: CAPI
[nvadist] Set record before launch to 1 because of CAPI
[nvadist] Record messsage before launching alarm: 1
[nvadist] Start call back to play recorded message: 1
[nvadist] Play voxfile v1010_1.vox of alarm-in box
file d:\dbv1\v1010_1.wav not found
file d:\dbv1\vm1010_1.wav not found
[nvadist] No message found for the alarm-in key: 1010
file d:\dbv1\v101x_1.wav not found
file d:\dbv1\v10xx_1.wav not found
[nvadist] Alarmin message v10xx_1.vox was not found
file d:\dbv1\v1xxx_1.wav not found
[nvadist] Play  please speak after the beep as default -> no alarmmessage found
play \dtvox\nvadist.wav (wave): 8 seconds: ...play= \dtvox\nvadist.wav[0] ... st
d
  6..done playin  5[nvadist] Start recordig filename before launching alarm :4DD
04A3C.wav  for max. 600 1/10 sec
play d:\dtvox\peepton.wav (wave): 0 seconds: ...play= d:\dtvox\peepton.wav[0] ..
. std
..done playin  0record wave: q: 3> recording d:\dbv1\4dd04a3c.wav... 61/  5 disc
 info indication (4)

m_InterruptConnection 1

m_DisconnectB3Indication

m_DisconnectB3ConfirmationBad [5301]

Call disconnected (00005301)

 caller disconnected
Fastbusy detected
[nvadist] Check if recorded alarmmessage size is larger then: 5000
[nvadist] Current size of file 4DD04A3C.wav :43520
-load code from file <nvasetlaunchedby.nve>  - 192 instructions, version: 6.0

[nvasetlaunchedby] Caller 1100 has launched alarm
[nvasetlaunchedby] No SIP call -> add full caller name to launched by
[nvasetlaunchedby] Launched by: Tel_1100-User1100lang_Vor
free code for nvasetlaunchedby
[nvadist] Start alarm for key 7509 with filename 4DD04A3C.wav
[nvadist] start cmd: nvadist.bat 7509 4DD04A3C 4DD04A3C.wav "Tel_1100-User1100la
ng_Vor" 1010
 maxwait: 1 sec.. exited (0)
[nvadist] st: 0
[nvadist] Check for entry specific wav file: \dtvox\.\nvaalrgo_1010.wav
file \dtvox\nvaalrgo_1010.wav not found
 caller disconnected
Fastbusy detected
wrj-hangup: rc=1 Cleanup(0..318) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[15.05 23:48:54]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 23:48:54]
inibase...
ini-base not present.
done
::
10 now dial the application on line 10    1






















awdir\sqljob.\nv_alarm_exec\INSERT_LKM-AM-ALR1_4DCE811A_0_1.job
free code for nvasql_call
[d:\nvt\.\nvadial] Dial second number if not successfull: 0
-load code from file <nvawrdb.nve>  - 2859 instructions, version: 6.0

[nvawrdb] Start of module [nvawrdb]
[nvawrdb] Write alarm data to SQL: 1
[nvawrdb] Set done flag to: 1
free code for nvawrdb
[d:\nvt\.\nvadial] END Dialout
free code for d:\nvt\.\nvadial
NORMAL TERMINATIONnvt return status: 19no client specific endup routine
[14.05 17:26:18]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [14.05 17:26:18]
inibase...
ini-base not present.
done
::
10 now dial the application on line 10    5set..x..dig..boot..open..Line 10 open
ed [00000A01]
done
Line 10 started
opening view_file .d:\nvt\tel\.\TEL10.DAT.
batch-programs through <d:\nvt\.\nvtbatch> activated (factor= 0)
post-job-programs through <d:\nvt\.\nvtpost>polling for jobs activated
nvtpostX.dbf:1:ON2:ON3:ON4:ON5:ON6:ON7:ON8:ON9:ON
voicemail-support through <d:\db1\vm001>

program <nvastart> as primary startup
wait-delay-factor: nvtque.exe batchlines= 0

NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 01:03:31]
10 now dial the application on line 10 <    1>
Call offered (0A01:00005301)

answer call...> waiting to accept call...  0
m_ConnectB3Indication

m_ConnectB3ActiveIndication
..audio channel ready..
Incoming call from [1100]

[15.05 23:48:44]
-load code from file <nvastart.nve>  - 10361 instructions, version: 6.0

[nvastart] Start of module [nvastart] rev:1901
[nvastart] Used module for: CAPI
[nvastart] Use new refnumber: 4DD04A3C for new alarm
[nvastart] Ref Number: 4DD04A3C
[nvastart] Alarm log file: d:\nvt\log\.\4DD04A3C.log
<d:\nvt\.\nvawritelogsections.nve> nvt-program non existent
[nvastart] INT_Phone (DDI): 1010
[nvastart] EXT_Phone (CLI): 1100
[nvastart] OWN_PHONE:   1010
[nvastart] PHONETYPE:   0
[nvastart] CALLER NAME: User1100lang Vor
[nvastart] CALL ID:
-load code from file <nvaddipreprocessing.nve>  - 604 instructions, version: 6.0


[nvaddipreprocessing] Start nvaddipreprocessing module
[nvaddipreprocessing] DDILocDecodingActive from the section [nvaddipreprocessing
] in nvalarm.ini is set to 0
[nvaddipreprocessing] No DDI decoding required - return to nvastart
[nvaddipreprocessing] Mode: CAPI
[nvaddipreprocessing] Check if prefix is removed from DDI
[nvaddipreprocessing] DDI Length: 4
[nvaddipreprocessing] Check if Alcatel DECT Call with 4 digit DDI
free code for nvaddipreprocessing
-load code from file <nvaddiconv.nve>  - 1799 instructions, version: 6.0

[nvaddiconv] Start of module [nvaddiconv]
[nvaddiconv] No DDI conversion active -> return
free code for nvaddiconv
-load code from file <nvacliconv.nve>  - 258 instructions, version: 6.0

[nvacliconv] Start of module [nvacliconv]
free code for nvacliconv
-load code from file <nvaddimapping.nve>  - 227 instructions, version: 6.0

[nvaddimapping] DDI converter with mapping table
[nvaddimapping] Get DDI for 1010 from nvaddimapping.ini
[nvaddimapping] No mapping for DDI defined
free code for nvaddimapping
-load code from file <nvaclimapping.nve>  - 252 instructions, version: 6.0

[nvaclimapping] CLI converter with mapping table
[nvaclimapping] Get CLI for 1100 from nvaclimapping.ini
[nvaclimapping] No mapping for CLI defined -> return
free code for nvaclimapping
-load code from file <nvaddiclialr.nve>  - 1596 instructions, version: 6.0

[nvaddiclialr] Start of module [nvaddiclialr]
[nvaddiclialr] DDI CLI Alarm is not active -> return
free code for nvaddiclialr
<d:\nvt\.\nvautoconf.nve> nvt-program non existent
[nvastart] Schedule function acitve: 0
[nvastart] Language for incoming entry: DE
[nvastart] Set lg1 directory to language: DE
[nvastart] German -> Set to dtvox
[nvastart] Status of mailbox 1010 is : 92
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1010
[nvawhitelist] No whitelist for alarm-in 1010
free code for nvawhitelist
[nvastart] In-Type of mailbox 1010 is : 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 1010
free code for nvasetlg
[nvastart] Specified alarm for CLI 1100 =
[nvastart] process cmd: nve nvasql_incoming 1 -s21010 -s34DD04A3C -s41100 -s5Use
r1100lang Vor -i11010 -i20 -i310 -i47509 -i50 -i90
[nvastart] Distribution with alarmkey: 7509
-load code from file <nvadist.nve>  - 4172 instructions, version: 6.0

[nvadist] Start of module [nvadist]
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1010
[nvawhitelist] No whitelist for alarm-in 1010
free code for nvawhitelist
[nvadist] Record alarmmessage: 1
[nvadist] Module: CAPI
[nvadist] Set record before launch to 1 because of CAPI
[nvadist] Record messsage before launching alarm: 1
[nvadist] Start call back to play recorded message: 1
[nvadist] Play voxfile v1010_1.vox of alarm-in box
file d:\dbv1\v1010_1.wav not found
file d:\dbv1\vm1010_1.wav not found
[nvadist] No message found for the alarm-in key: 1010
file d:\dbv1\v101x_1.wav not found
file d:\dbv1\v10xx_1.wav not found
[nvadist] Alarmin message v10xx_1.vox was not found
file d:\dbv1\v1xxx_1.wav not found
[nvadist] Play  please speak after the beep as default -> no alarmmessage found
play \dtvox\nvadist.wav (wave): 8 seconds: ...play= \dtvox\nvadist.wav[0] ... st
d
  6..done playin  5[nvadist] Start recordig filename before launching alarm :4DD
04A3C.wav  for max. 600 1/10 sec
play d:\dtvox\peepton.wav (wave): 0 seconds: ...play= d:\dtvox\peepton.wav[0] ..
. std
..done playin  0record wave: q: 3> recording d:\dbv1\4dd04a3c.wav... 61/  5 disc
 info indication (4)

m_InterruptConnection 1

m_DisconnectB3Indication

m_DisconnectB3ConfirmationBad [5301]

Call disconnected (00005301)

 caller disconnected
Fastbusy detected
[nvadist] Check if recorded alarmmessage size is larger then: 5000
[nvadist] Current size of file 4DD04A3C.wav :43520
-load code from file <nvasetlaunchedby.nve>  - 192 instructions, version: 6.0

[nvasetlaunchedby] Caller 1100 has launched alarm
[nvasetlaunchedby] No SIP call -> add full caller name to launched by
[nvasetlaunchedby] Launched by: Tel_1100-User1100lang_Vor
free code for nvasetlaunchedby
[nvadist] Start alarm for key 7509 with filename 4DD04A3C.wav
[nvadist] start cmd: nvadist.bat 7509 4DD04A3C 4DD04A3C.wav "Tel_1100-User1100la
ng_Vor" 1010
 maxwait: 1 sec.. exited (0)
[nvadist] st: 0
[nvadist] Check for entry specific wav file: \dtvox\.\nvaalrgo_1010.wav
file \dtvox\nvaalrgo_1010.wav not found
 caller disconnected
Fastbusy detected
wrj-hangup: rc=1 Cleanup(0..318) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[15.05 23:48:54]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [15.05 23:48:54]
inibase...
ini-base not present.
done
::
10 now dial the application on line 10    1




































gActive from the section [nvaddipreprocessing] in nvalarm.ini is set to 0
[nvaddipreprocessing] No DDI decoding required - return to nvastart
[nvaddipreprocessing] Mode: CAPI
[nvaddipreprocessing] Check if prefix is removed from DDI
[nvaddipreprocessing] DDI Length: 4
[nvaddipreprocessing] Check if Alcatel DECT Call with 4 digit DDI
free code for nvaddipreprocessing
-load code from file <nvaddiconv.nve>  - 1799 instructions, version: 6.0

[nvaddiconv] Start of module [nvaddiconv]
[nvaddiconv] No DDI conversion active -> return
free code for nvaddiconv
-load code from file <nvacliconv.nve>  - 258 instructions, version: 6.0

[nvacliconv] Start of module [nvacliconv]
free code for nvacliconv
-load code from file <nvaddimapping.nve>  - 227 instructions, version: 6.0

[nvaddimapping] DDI converter with mapping table
[nvaddimapping] Get DDI for 6#66 from nvaddimapping.ini
[nvaddimapping] New DDI :66
free code for nvaddimapping
-load code from file <nvaclimapping.nve>  - 252 instructions, version: 6.0

[nvaclimapping] CLI converter with mapping table
[nvaclimapping] Get CLI for 1100 from nvaclimapping.ini
[nvaclimapping] No mapping for CLI defined -> return
free code for nvaclimapping
<d:\nvt\.\nvaddiclialr.nve> nvt-program non existent
-load code from file <nvautoconf.nve>  - 1762 instructions, version: 6.0

[nvautoconf] Start of module [nvsh_listvar]
[nvautoconf]
[nvautoconf] st             : 0
[nvautoconf] Hangup         : 0
[nvautoconf] Fastbusy       : 0
[nvautoconf] Loopdrop       : 0
[nvautoconf] Notfound       : 0
[nvautoconf] Timeout        : 0
[nvautoconf] key            :
[nvautoconf] dbok           : 0
[nvautoconf] dbint          : 0
[nvautoconf] dbstr          :
[nvautoconf]
[nvautoconf] nvtini_linenbr : 18
[nvautoconf] nvtini_lg1     : d:\dtvox\
[nvautoconf] nvtini_lg2     : d:\gbvox\
[nvautoconf] nvtini_dbv1    : d:\dbv1\
[nvautoconf] nvtini_dbv2    :
[nvautoconf] nvtini_db1     : d:\db1\
[nvautoconf] nvtini_db2     :
[nvautoconf] nvtini_aab1    : v
[nvautoconf] nvtini_aab2    :
[nvautoconf] nvtini_ts1     : 111
[nvautoconf] nvtini_ts2     : 0417431477
[nvautoconf] nvtini_din     : 0
[nvautoconf] nvtini_tt      : 44
[nvautoconf] nvtini_amt     :
[nvautoconf] nvtini_leave   : 45
[nvautoconf] nvtini_rings   : 1
[nvautoconf] nvtini_speckey : *89/*91
[nvautoconf] nvtini_us2     : d:\nvt\tel\
[nvautoconf] nvtini_us3     :
[nvautoconf] nvtini_us4     :
[nvautoconf] nvtini_hrlg    : 12
[nvautoconf] nvtini_maxrec  : 1800
[nvautoconf] nvtini_recqu   : 3
[nvautoconf] nvtini_ui4     : 0
[nvautoconf]
[nvautoconf] nvtini_progname:
[nvautoconf] nvtini_progdir : d:\nvt\
[nvautoconf] nvtini_statname: statYYWW.log
[nvautoconf] nvtini_statdir : d:\nvt\log\
[nvautoconf] nvtini_maindir : d:\nvt\
[nvautoconf] nvtini_dbflags : 0
[nvautoconf] nvtini_ring_sim: 0
[nvautoconf] nvtini_stocode : 0
[nvautoconf] nvtini_autorun : 0
[nvautoconf] nvtini_checktime:0
[nvautoconf] nvtini_debugger: 0
[nvautoconf] nvtini_devloop : 0
[nvautoconf] nvtini_deb_ident:0
[nvautoconf] nvtini_firsttime:0
[nvautoconf] nvtini_viewcode: 0
[nvautoconf] nvtini_win     : 0
[nvautoconf]
[nvautoconf] nvtini_f1      : 0
[nvautoconf] nvtini_f2      : 0
[nvautoconf] nvtini_f3      : 0
[nvautoconf] nvtini_f4      : 0
[nvautoconf] nvtini_f5      : 0
[nvautoconf] nvtini_f6      : 0
[nvautoconf] nvtini_f7      : 0
[nvautoconf] nvtini_f8      : 0
[nvautoconf] nvtini_f9      : 0
[nvautoconf] nvtini_sn1     :
[nvautoconf] nvtini_sn2     :
[nvautoconf] nvtini_sn3     :
[nvautoconf]
[nvautoconf] nvt_hseconds   : 00
[nvautoconf] nvt_seconds    : 03
[nvautoconf] nvt_minutes    : 40
[nvautoconf] nvt_hours      : 01
[nvautoconf] nvt_wday       : 1
[nvautoconf] nvt_yday       : 136
[nvautoconf] nvt_day        : 16
[nvautoconf] nvt_month      : 05
[nvautoconf] nvt_year       : 2011
[nvautoconf] nvt_time       : 01:40
[nvautoconf] nvt_date       : 16.05
[nvautoconf]
[nvautoconf] nvt_ext_phone  : 1100
[nvautoconf] nvt_int_phone  : 66
[nvautoconf] nvt_phone_type : 0
[nvautoconf] nvtini_linegrp : 18
[nvautoconf] nvt_own_phone  : 6#66
[nvautoconf]
[nvautoconf] nvt_call_id    :
[nvautoconf] nvt_call_name  :
[nvautoconf] nvt_call_ref   :
[nvautoconf] nvt_call_prev  :
[nvautoconf] nvt_call_client:
[nvautoconf] nvt_week       : 20
[nvautoconf]
[nvautoconf] key1           :
[nvautoconf] key2           :
[nvautoconf] key3           :
[nvautoconf] key4           :
[nvautoconf] key5           :
[nvautoconf] key6           :
[nvautoconf] key7           :
[nvautoconf] key8           :
[nvautoconf] key9           :
[nvautoconf]
[nvautoconf] nvt_fname1     :
[nvautoconf] nvt_fname2     :
[nvautoconf] nvt_fname3     :
[nvautoconf] nvt_fname4     :
[nvautoconf] nvt_fname5     :
[nvautoconf] nvt_fname6     :
[nvautoconf] nvt_fname7     :
[nvautoconf] nvt_fname8     :
[nvautoconf] nvt_fname9     :
[nvautoconf] nvt_fname10    :
[nvautoconf]
[nvautoconf] nvtini_lg3     :
[nvautoconf] nvtini_lg4     :
[nvautoconf] nvtini_lg5     :
[nvautoconf] nvtini_lg6     :
[nvautoconf] nvtini_lg7     :
[nvautoconf] nvtini_lg8     :
[nvautoconf] nvtini_lg9     :
[nvautoconf] nvtini_lg10    :
[nvautoconf]
[nvautoconf] nvt_net_path   :
[nvautoconf] nvt_data_path  :
[nvautoconf] nvt_vox_path   :
[nvautoconf] nvt_duration   : 0
[nvautoconf] nvt_debug      : 0
[nvautoconf]
[nvautoconf] nvt_ip_addr1   :
[nvautoconf] nvt_ip_addr2   :
[nvautoconf] nvt_ip_addr3   :
[nvautoconf] nvt_ip_addr4   :
[nvautoconf] nvt_ip_addr5   :
[nvautoconf] nvt_port_addr1 :
[nvautoconf] nvt_port_addr2 :
[nvautoconf] nvt_port_addr3 :
[nvautoconf] nvt_port_addr4 :
[nvautoconf] nvt_port_addr5 :
[nvautoconf]
[nvautoconf] nvt_anc_path   :
[nvautoconf] nvt_anc_line   :
[nvautoconf] nvt_progname1  :
[nvautoconf] nvt_progname2  :
[nvautoconf] nvt_progname3  :
[nvautoconf] nvt_progname4  :
[nvautoconf] nvt_progname5  :
[nvautoconf] nvt_progname6  :
[nvautoconf] nvt_taximpulse : 0
[nvautoconf] nvt_st         :
[nvautoconf]
[nvautoconf] nvtini_s1:  User1100lang Vor
[nvautoconf] nvtini_s2:  6#66
[nvautoconf] nvtini_s3:  4DD06453
[nvautoconf] nvtini_s4:
[nvautoconf] nvtini_s5:
[nvautoconf] nvtini_s6:  6#66
[nvautoconf] nvtini_s7:
[nvautoconf] nvtini_s8:
[nvautoconf] nvtini_s9:
[nvautoconf] nvtini_s10:
[nvautoconf] nvtini_s11:
[nvautoconf] nvtini_s12:
[nvautoconf] nvtini_s13:
[nvautoconf] nvtini_s14:
[nvautoconf] nvtini_s15:
[nvautoconf] nvtini_s16:
[nvautoconf] nvtini_s17:
[nvautoconf] nvtini_s18:
[nvautoconf] nvtini_s19:
[nvautoconf] nvtini_s20:
[nvautoconf]
[nvautoconf] nvtini_i1:  66
[nvautoconf] nvtini_i2:  0
[nvautoconf] nvtini_i3:  18
[nvautoconf] nvtini_i4:  0
[nvautoconf] nvtini_i5:  0
[nvautoconf] nvtini_i6:  0
[nvautoconf] nvtini_i7:  0
[nvautoconf] nvtini_i8:  0
[nvautoconf] nvtini_i9:  0
[nvautoconf] nvtini_i10: 0
[nvautoconf] nvtini_i11: 0
[nvautoconf] nvtini_i12: 0
[nvautoconf] nvtini_i13: 0
[nvautoconf] nvtini_i14: 0
[nvautoconf] nvtini_i15: 0
[nvautoconf] nvtini_i16: 0
[nvautoconf] nvtini_i17: 0
[nvautoconf] nvtini_i18: 0
[nvautoconf] nvtini_i19: 0
[nvautoconf] nvtini_i20: 0
[nvautoconf]
[nvautoconf] nvt_i1_x:   0
[nvautoconf] nvt_i2_x:   0
[nvautoconf] nvt_i3_x:   0
[nvautoconf] nvt_i4_x:   0
[nvautoconf] nvt_i5_x:   0
[nvautoconf] nvt_i6_x:   0
[nvautoconf] nvt_i7_x:   0
[nvautoconf] nvt_i8_x:   0
[nvautoconf] nvt_i9_x:   0
[nvautoconf]
[nvautoconf] nvt_s1_x:
[nvautoconf] nvt_s2_x:
[nvautoconf] nvt_s3_x:
[nvautoconf] nvt_s4_x:
[nvautoconf] nvt_s5_x:
[nvautoconf] nvt_s6_x:
[nvautoconf] nvt_s7_x:
[nvautoconf] nvt_s8_x:
[nvautoconf] nvt_s9_x:
















[nvautoconf] Hangup         : 0
[nvautoconf] Fastbusy       : 0
[nvautoconf] Loopdrop       : 0
[nvautoconf] Notfound       : 0
[nvautoconf] Timeout        : 0
[nvautoconf] key            :
[nvautoconf] dbok           : 0
[nvautoconf] dbint          : 0
[nvautoconf] dbstr          :
[nvautoconf]
[nvautoconf] nvtini_linenbr : 18
[nvautoconf] nvtini_lg1     : d:\dtvox\
[nvautoconf] nvtini_lg2     : d:\gbvox\
[nvautoconf] nvtini_dbv1    : d:\dbv1\
[nvautoconf] nvtini_dbv2    :
[nvautoconf] nvtini_db1     : d:\db1\
[nvautoconf] nvtini_db2     :
[nvautoconf] nvtini_aab1    : v
[nvautoconf] nvtini_aab2    :
[nvautoconf] nvtini_ts1     : 111
[nvautoconf] nvtini_ts2     : 0417431477
[nvautoconf] nvtini_din     : 0
[nvautoconf] nvtini_tt      : 44
[nvautoconf] nvtini_amt     :
[nvautoconf] nvtini_leave   : 45
[nvautoconf] nvtini_rings   : 1
[nvautoconf] nvtini_speckey : *89/*91
[nvautoconf] nvtini_us2     : d:\nvt\tel\
[nvautoconf] nvtini_us3     :
[nvautoconf] nvtini_us4     :
[nvautoconf] nvtini_hrlg    : 12
[nvautoconf] nvtini_maxrec  : 1800
[nvautoconf] nvtini_recqu   : 3
[nvautoconf] nvtini_ui4     : 0
[nvautoconf]
[nvautoconf] nvtini_progname:
[nvautoconf] nvtini_progdir : d:\nvt\
[nvautoconf] nvtini_statname: statYYWW.log
[nvautoconf] nvtini_statdir : d:\nvt\log\
[nvautoconf] nvtini_maindir : d:\nvt\
[nvautoconf] nvtini_dbflags : 0
[nvautoconf] nvtini_ring_sim: 0
[nvautoconf] nvtini_stocode : 0
[nvautoconf] nvtini_autorun : 0
[nvautoconf] nvtini_checktime:0
[nvautoconf] nvtini_debugger: 0
[nvautoconf] nvtini_devloop : 0
[nvautoconf] nvtini_deb_ident:0
[nvautoconf] nvtini_firsttime:0
[nvautoconf] nvtini_viewcode: 0
[nvautoconf] nvtini_win     : 0
[nvautoconf]
[nvautoconf] nvtini_f1      : 0
[nvautoconf] nvtini_f2      : 0
[nvautoconf] nvtini_f3      : 0
[nvautoconf] nvtini_f4      : 0
[nvautoconf] nvtini_f5      : 0
[nvautoconf] nvtini_f6      : 0
[nvautoconf] nvtini_f7      : 0
[nvautoconf] nvtini_f8      : 0
[nvautoconf] nvtini_f9      : 0
[nvautoconf] nvtini_sn1     :
[nvautoconf] nvtini_sn2     :
[nvautoconf] nvtini_sn3     :
[nvautoconf]
[nvautoconf] nvt_hseconds   : 00
[nvautoconf] nvt_seconds    : 03
[nvautoconf] nvt_minutes    : 40
[nvautoconf] nvt_hours      : 01
[nvautoconf] nvt_wday       : 1
[nvautoconf] nvt_yday       : 136
[nvautoconf] nvt_day        : 16
[nvautoconf] nvt_month      : 05
[nvautoconf] nvt_year       : 2011
[nvautoconf] nvt_time       : 01:40
[nvautoconf] nvt_date       : 16.05
[nvautoconf]
[nvautoconf] nvt_ext_phone  : 1100
[nvautoconf] nvt_int_phone  : 66
[nvautoconf] nvt_phone_type : 0
[nvautoconf] nvtini_linegrp : 18
[nvautoconf] nvt_own_phone  : 6#66
[nvautoconf]
[nvautoconf] nvt_call_id    :
[nvautoconf] nvt_call_name  :
[nvautoconf] nvt_call_ref   :
[nvautoconf] nvt_call_prev  :
[nvautoconf] nvt_call_client:
[nvautoconf] nvt_week       : 20
[nvautoconf]
[nvautoconf] key1           :
[nvautoconf] key2           :
[nvautoconf] key3           :
[nvautoconf] key4           :
[nvautoconf] key5           :
[nvautoconf] key6           :
[nvautoconf] key7           :
[nvautoconf] key8           :
[nvautoconf] key9           :
[nvautoconf]
[nvautoconf] nvt_fname1     :
[nvautoconf] nvt_fname2     :
[nvautoconf] nvt_fname3     :
[nvautoconf] nvt_fname4     :
[nvautoconf] nvt_fname5     :
[nvautoconf] nvt_fname6     :
[nvautoconf] nvt_fname7     :
[nvautoconf] nvt_fname8     :
[nvautoconf] nvt_fname9     :
[nvautoconf] nvt_fname10    :
[nvautoconf]
[nvautoconf] nvtini_lg3     :
[nvautoconf] nvtini_lg4     :
[nvautoconf] nvtini_lg5     :
[nvautoconf] nvtini_lg6     :
[nvautoconf] nvtini_lg7     :
[nvautoconf] nvtini_lg8     :
[nvautoconf] nvtini_lg9     :
[nvautoconf] nvtini_lg10    :
[nvautoconf]
[nvautoconf] nvt_net_path   :
[nvautoconf] nvt_data_path  :
[nvautoconf] nvt_vox_path   :
[nvautoconf] nvt_duration   : 0
[nvautoconf] nvt_debug      : 0
[nvautoconf]
[nvautoconf] nvt_ip_addr1   :
[nvautoconf] nvt_ip_addr2   :
[nvautoconf] nvt_ip_addr3   :
[nvautoconf] nvt_ip_addr4   :
[nvautoconf] nvt_ip_addr5   :
[nvautoconf] nvt_port_addr1 :
[nvautoconf] nvt_port_addr2 :
[nvautoconf] nvt_port_addr3 :
[nvautoconf] nvt_port_addr4 :
[nvautoconf] nvt_port_addr5 :
[nvautoconf]
[nvautoconf] nvt_anc_path   :
[nvautoconf] nvt_anc_line   :
[nvautoconf] nvt_progname1  :
[nvautoconf] nvt_progname2  :
[nvautoconf] nvt_progname3  :
[nvautoconf] nvt_progname4  :
[nvautoconf] nvt_progname5  :
[nvautoconf] nvt_progname6  :
[nvautoconf] nvt_taximpulse : 0
[nvautoconf] nvt_st         :
[nvautoconf]
[nvautoconf] nvtini_s1:  User1100lang Vor
[nvautoconf] nvtini_s2:  6#66
[nvautoconf] nvtini_s3:  4DD06453
[nvautoconf] nvtini_s4:
[nvautoconf] nvtini_s5:
[nvautoconf] nvtini_s6:  6#66
[nvautoconf] nvtini_s7:
[nvautoconf] nvtini_s8:
[nvautoconf] nvtini_s9:
[nvautoconf] nvtini_s10:
[nvautoconf] nvtini_s11:
[nvautoconf] nvtini_s12:
[nvautoconf] nvtini_s13:
[nvautoconf] nvtini_s14:
[nvautoconf] nvtini_s15:
[nvautoconf] nvtini_s16:
[nvautoconf] nvtini_s17:
[nvautoconf] nvtini_s18:
[nvautoconf] nvtini_s19:
[nvautoconf] nvtini_s20:
[nvautoconf]
[nvautoconf] nvtini_i1:  66
[nvautoconf] nvtini_i2:  0
[nvautoconf] nvtini_i3:  18
[nvautoconf] nvtini_i4:  0
[nvautoconf] nvtini_i5:  0
[nvautoconf] nvtini_i6:  0
[nvautoconf] nvtini_i7:  0
[nvautoconf] nvtini_i8:  0
[nvautoconf] nvtini_i9:  0
[nvautoconf] nvtini_i10: 0
[nvautoconf] nvtini_i11: 0
[nvautoconf] nvtini_i12: 0
[nvautoconf] nvtini_i13: 0
[nvautoconf] nvtini_i14: 0
[nvautoconf] nvtini_i15: 0
[nvautoconf] nvtini_i16: 0
[nvautoconf] nvtini_i17: 0
[nvautoconf] nvtini_i18: 0
[nvautoconf] nvtini_i19: 0
[nvautoconf] nvtini_i20: 0
[nvautoconf]
[nvautoconf] nvt_i1_x:   0
[nvautoconf] nvt_i2_x:   0
[nvautoconf] nvt_i3_x:   0
[nvautoconf] nvt_i4_x:   0
[nvautoconf] nvt_i5_x:   0
[nvautoconf] nvt_i6_x:   0
[nvautoconf] nvt_i7_x:   0
[nvautoconf] nvt_i8_x:   0
[nvautoconf] nvt_i9_x:   0
[nvautoconf]
[nvautoconf] nvt_s1_x:
[nvautoconf] nvt_s2_x:
[nvautoconf] nvt_s3_x:
[nvautoconf] nvt_s4_x:
[nvautoconf] nvt_s5_x:
[nvautoconf] nvt_s6_x:
[nvautoconf] nvt_s7_x:
[nvautoconf] nvt_s8_x:
[nvautoconf] nvt_s9_x:
free code for nvautoconf
[nvastart] Schedule function acitve: 0
[nvastart] Language for incoming entry: DE
[nvastart] Set lg1 directory to language: DE
[nvastart] German -> Set to dtvox
[nvastart] Status of mailbox 66 is : 92
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 66
[nvawhitelist] No whitelist for alarm-in 66
free code for nvawhitelist
[nvastart] In-Type of mailbox 66 is : 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 66
free code for nvasetlg
[nvastart] Specified alarm for CLI 1100 =
[nvastart] process cmd: nve nvasql_incoming 1 -s26#66 -s34DD06453 -s41100 -s5Use
r1100lang Vor -i166 -i20 -i318 -i47509 -i50 -i90
[nvastart] Distribution with alarmkey: 7509
-load code from file <nvadist.nve>  - 4182 instructions, version: 6.0

[nvadist] Start of module [nvadist]
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 66
[nvawhitelist] No whitelist for alarm-in 66
free code for nvawhitelist
[nvadist] Record alarmmessage: 1
[nvadist] Module: CAPI
[nvadist] Set record before launch to 1 because of CAPI
[nvadist] Record messsage before launching alarm: 1
[nvadist] Start call back to play recorded message: 1
[nvadist] Play voxfile v66_1.vox of alarm-in box
file d:\dbv1\v66_1.wav not found
file d:\dbv1\vm66_1.wav not found
[nvadist] No message found for the alarm-in key: 66
file d:\dbv1\v66x_1.wav not found
file d:\dbv1\v66xx_1.wav not found
[nvadist] Alarmin message v66xx_1.vox was not found
file d:\dbv1\v6xxx_1.wav not found
[nvadist] Play  please speak after the beep as default -> no alarmmessage found
play \dtvox\nvadist.wav (wave): 8 seconds: ...play= \dtvox\nvadist.wav[0] ... st
d
  6..done playin  5[nvadist] Start recordig filename before launching alarm :4DD
06453.wav  for max. 600 1/10 sec
play d:\dtvox\peepton.wav (wave): 0 seconds: ...play= d:\dtvox\peepton.wav[0] ..
. std
..done playin  0record wave: q: 3> recording d:\dbv1\4dd06453.wav... 61/  5 disc
 info indication (4)

m_InterruptConnection 1

m_DisconnectB3Indication

Call disconnected (00007501)

 caller disconnected
Fastbusy detected
[nvadist] Check if recorded alarmmessage size is larger then: 5000
[nvadist] Current size of file 4DD06453.wav :47616
-load code from file <nvasetlaunchedby.nve>  - 192 instructions, version: 6.0

[nvasetlaunchedby] Caller 1100 has launched alarm
[nvasetlaunchedby] No SIP call -> add full caller name to launched by
[nvasetlaunchedby] Launched by: Tel_1100-User1100lang_Vor
free code for nvasetlaunchedby
[nvadist] Start alarm for key 7509 with filename 4DD06453.wav
[nvadist] start cmd: nvadist.bat 7509 4DD06453 4DD06453.wav "Tel_1100-User1100la
ng_Vor" 66
 maxwait: 1 sec.. exited (0)
[nvadist] st: 0
 maxwait: 1 sec.. exited (107)
[nvadist] st: 0
[nvadist] Alarm was launched  Thanks for useing New Voice Alarm
 caller disconnected
Fastbusy detected
wrj-hangup: rc=1 Cleanup(0..318) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[16.05 01:40:23]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [16.05 01:40:23]
inibase...
ini-base not present.
done
::18 now dial the application on line 18    1






































rt nvaddipreprocessing module
[nvaddipreprocessing] DDILocDecodingActive from the section [nvaddipreprocessing
] in nvalarm.ini is set to 0
[nvaddipreprocessing] No DDI decoding required - return to nvastart
[nvaddipreprocessing] Mode: CAPI
[nvaddipreprocessing] Check if prefix is removed from DDI
[nvaddipreprocessing] DDI Length: 4
[nvaddipreprocessing] Check if Alcatel DECT Call with 4 digit DDI
free code for nvaddipreprocessing
-load code from file <nvaddiconv.nve>  - 1799 instructions, version: 6.0

[nvaddiconv] Start of module [nvaddiconv]
[nvaddiconv] No DDI conversion active -> return
free code for nvaddiconv
-load code from file <nvacliconv.nve>  - 258 instructions, version: 6.0

[nvacliconv] Start of module [nvacliconv]
free code for nvacliconv
-load code from file <nvaddimapping.nve>  - 227 instructions, version: 6.0

[nvaddimapping] DDI converter with mapping table
[nvaddimapping] Get DDI for 1010 from nvaddimapping.ini
[nvaddimapping] No mapping for DDI defined
free code for nvaddimapping
-load code from file <nvaclimapping.nve>  - 252 instructions, version: 6.0

[nvaclimapping] CLI converter with mapping table
[nvaclimapping] Get CLI for 1100 from nvaclimapping.ini
[nvaclimapping] No mapping for CLI defined -> return
free code for nvaclimapping
<d:\nvt\.\nvaddiclialr.nve> nvt-program non existent
-load code from file <nvautoconf.nve>  - 1762 instructions, version: 6.0

[nvautoconf] Start of module [nvsh_listvar]
[nvautoconf]
[nvautoconf] st             : 0
[nvautoconf] Hangup         : 0
[nvautoconf] Fastbusy       : 0
[nvautoconf] Loopdrop       : 0
[nvautoconf] Notfound       : 0
[nvautoconf] Timeout        : 0
[nvautoconf] key            :
[nvautoconf] dbok           : 0
[nvautoconf] dbint          : 0
[nvautoconf] dbstr          :
[nvautoconf]
[nvautoconf] nvtini_linenbr : 19
[nvautoconf] nvtini_lg1     : d:\dtvox\
[nvautoconf] nvtini_lg2     : d:\gbvox\
[nvautoconf] nvtini_dbv1    : d:\dbv1\
[nvautoconf] nvtini_dbv2    :
[nvautoconf] nvtini_db1     : d:\db1\
[nvautoconf] nvtini_db2     :
[nvautoconf] nvtini_aab1    : v
[nvautoconf] nvtini_aab2    :
[nvautoconf] nvtini_ts1     : 111
[nvautoconf] nvtini_ts2     : 0417431477
[nvautoconf] nvtini_din     : 0
[nvautoconf] nvtini_tt      : 44
[nvautoconf] nvtini_amt     :
[nvautoconf] nvtini_leave   : 45
[nvautoconf] nvtini_rings   : 1
[nvautoconf] nvtini_speckey : *89/*91
[nvautoconf] nvtini_us2     : d:\nvt\tel\
[nvautoconf] nvtini_us3     :
[nvautoconf] nvtini_us4     :
[nvautoconf] nvtini_hrlg    : 12
[nvautoconf] nvtini_maxrec  : 1800
[nvautoconf] nvtini_recqu   : 3
[nvautoconf] nvtini_ui4     : 0
[nvautoconf]
[nvautoconf] nvtini_progname:
[nvautoconf] nvtini_progdir : d:\nvt\
[nvautoconf] nvtini_statname: statYYWW.log
[nvautoconf] nvtini_statdir : d:\nvt\log\
[nvautoconf] nvtini_maindir : d:\nvt\
[nvautoconf] nvtini_dbflags : 0
[nvautoconf] nvtini_ring_sim: 0
[nvautoconf] nvtini_stocode : 0
[nvautoconf] nvtini_autorun : 0
[nvautoconf] nvtini_checktime:0
[nvautoconf] nvtini_debugger: 0
[nvautoconf] nvtini_devloop : 0
[nvautoconf] nvtini_deb_ident:0
[nvautoconf] nvtini_firsttime:0
[nvautoconf] nvtini_viewcode: 0
[nvautoconf] nvtini_win     : 0
[nvautoconf]
[nvautoconf] nvtini_f1      : 0
[nvautoconf] nvtini_f2      : 0
[nvautoconf] nvtini_f3      : 0
[nvautoconf] nvtini_f4      : 0
[nvautoconf] nvtini_f5      : 0
[nvautoconf] nvtini_f6      : 0
[nvautoconf] nvtini_f7      : 0
[nvautoconf] nvtini_f8      : 0
[nvautoconf] nvtini_f9      : 0
[nvautoconf] nvtini_sn1     :
[nvautoconf] nvtini_sn2     :
[nvautoconf] nvtini_sn3     :
[nvautoconf]
[nvautoconf] nvt_hseconds   : 00
[nvautoconf] nvt_seconds    : 14
[nvautoconf] nvt_minutes    : 42
[nvautoconf] nvt_hours      : 01
[nvautoconf] nvt_wday       : 1
[nvautoconf] nvt_yday       : 136
[nvautoconf] nvt_day        : 16
[nvautoconf] nvt_month      : 05
[nvautoconf] nvt_year       : 2011
[nvautoconf] nvt_time       : 01:42
[nvautoconf] nvt_date       : 16.05
[nvautoconf]
[nvautoconf] nvt_ext_phone  : 1100
[nvautoconf] nvt_int_phone  : 1010
[nvautoconf] nvt_phone_type : 0
[nvautoconf] nvtini_linegrp : 19
[nvautoconf] nvt_own_phone  : 1010
[nvautoconf]
[nvautoconf] nvt_call_id    :
[nvautoconf] nvt_call_name  :
[nvautoconf] nvt_call_ref   :
[nvautoconf] nvt_call_prev  :
[nvautoconf] nvt_call_client:
[nvautoconf] nvt_week       : 20
[nvautoconf]
[nvautoconf] key1           :
[nvautoconf] key2           :
[nvautoconf] key3           :
[nvautoconf] key4           :
[nvautoconf] key5           :
[nvautoconf] key6           :
[nvautoconf] key7           :
[nvautoconf] key8           :
[nvautoconf] key9           :
[nvautoconf]
[nvautoconf] nvt_fname1     :
[nvautoconf] nvt_fname2     :
[nvautoconf] nvt_fname3     :
[nvautoconf] nvt_fname4     :
[nvautoconf] nvt_fname5     :
[nvautoconf] nvt_fname6     :
[nvautoconf] nvt_fname7     :
[nvautoconf] nvt_fname8     :
[nvautoconf] nvt_fname9     :
[nvautoconf] nvt_fname10    :
[nvautoconf]
[nvautoconf] nvtini_lg3     :
[nvautoconf] nvtini_lg4     :
[nvautoconf] nvtini_lg5     :
[nvautoconf] nvtini_lg6     :
[nvautoconf] nvtini_lg7     :
[nvautoconf] nvtini_lg8     :
[nvautoconf] nvtini_lg9     :
[nvautoconf] nvtini_lg10    :
[nvautoconf]
[nvautoconf] nvt_net_path   :
[nvautoconf] nvt_data_path  :
[nvautoconf] nvt_vox_path   :
[nvautoconf] nvt_duration   : 0
[nvautoconf] nvt_debug      : 0
[nvautoconf]
[nvautoconf] nvt_ip_addr1   :
[nvautoconf] nvt_ip_addr2   :
[nvautoconf] nvt_ip_addr3   :
[nvautoconf] nvt_ip_addr4   :
[nvautoconf] nvt_ip_addr5   :
[nvautoconf] nvt_port_addr1 :
[nvautoconf] nvt_port_addr2 :
[nvautoconf] nvt_port_addr3 :
[nvautoconf] nvt_port_addr4 :
[nvautoconf] nvt_port_addr5 :
[nvautoconf]
[nvautoconf] nvt_anc_path   :
[nvautoconf] nvt_anc_line   :
[nvautoconf] nvt_progname1  :
[nvautoconf] nvt_progname2  :
[nvautoconf] nvt_progname3  :
[nvautoconf] nvt_progname4  :
[nvautoconf] nvt_progname5  :
[nvautoconf] nvt_progname6  :
[nvautoconf] nvt_taximpulse : 0
[nvautoconf] nvt_st         :
[nvautoconf]
[nvautoconf] nvtini_s1:  User1100lang Vor
[nvautoconf] nvtini_s2:  1010
[nvautoconf] nvtini_s3:  4DD064D6
[nvautoconf] nvtini_s4:
[nvautoconf] nvtini_s5:
[nvautoconf] nvtini_s6:  1010
[nvautoconf] nvtini_s7:
[nvautoconf] nvtini_s8:
[nvautoconf] nvtini_s9:
[nvautoconf] nvtini_s10:
[nvautoconf] nvtini_s11:
[nvautoconf] nvtini_s12:
[nvautoconf] nvtini_s13:
[nvautoconf] nvtini_s14:
[nvautoconf] nvtini_s15:
[nvautoconf] nvtini_s16:
[nvautoconf] nvtini_s17:
[nvautoconf] nvtini_s18:
[nvautoconf] nvtini_s19:
[nvautoconf] nvtini_s20:
[nvautoconf]
[nvautoconf] nvtini_i1:  1010
[nvautoconf] nvtini_i2:  0
[nvautoconf] nvtini_i3:  19
[nvautoconf] nvtini_i4:  0
[nvautoconf] nvtini_i5:  0
[nvautoconf] nvtini_i6:  0
[nvautoconf] nvtini_i7:  0
[nvautoconf] nvtini_i8:  0
[nvautoconf] nvtini_i9:  0
[nvautoconf] nvtini_i10: 0
[nvautoconf] nvtini_i11: 0
[nvautoconf] nvtini_i12: 0
[nvautoconf] nvtini_i13: 0
[nvautoconf] nvtini_i14: 0
[nvautoconf] nvtini_i15: 0
[nvautoconf] nvtini_i16: 0
[nvautoconf] nvtini_i17: 0
[nvautoconf] nvtini_i18: 0
[nvautoconf] nvtini_i19: 0
[nvautoconf] nvtini_i20: 0
[nvautoconf]
[nvautoconf] nvt_i1_x:   0
[nvautoconf] nvt_i2_x:   0
[nvautoconf] nvt_i3_x:   0
[nvautoconf] nvt_i4_x:   0
[nvautoconf] nvt_i5_x:   0
[nvautoconf] nvt_i6_x:   0
[nvautoconf] nvt_i7_x:   0
[nvautoconf] nvt_i8_x:   0
[nvautoconf] nvt_i9_x:   0
[nvautoconf]
[nvautoconf] nvt_s1_x:
[nvautoconf] nvt_s2_x:
[nvautoconf] nvt_s3_x:
[nvautoconf] nvt_s4_x:
[nvautoconf] nvt_s5_x:
[nvautoconf] nvt_s6_x:
[nvautoconf] nvt_s7_x:
[nvautoconf] nvt_s8_x:
[nvautoconf] nvt_s9_x:















[nvautoconf] nvtini_amt     :
[nvautoconf] nvtini_leave   : 45
[nvautoconf] nvtini_rings   : 1
[nvautoconf] nvtini_speckey : *89/*91
[nvautoconf] nvtini_us2     : d:\nvt\tel\
[nvautoconf] nvtini_us3     :
[nvautoconf] nvtini_us4     :
[nvautoconf] nvtini_hrlg    : 12
[nvautoconf] nvtini_maxrec  : 1800
[nvautoconf] nvtini_recqu   : 3
[nvautoconf] nvtini_ui4     : 0
[nvautoconf]
[nvautoconf] nvtini_progname:
[nvautoconf] nvtini_progdir : d:\nvt\
[nvautoconf] nvtini_statname: statYYWW.log
[nvautoconf] nvtini_statdir : d:\nvt\log\
[nvautoconf] nvtini_maindir : d:\nvt\
[nvautoconf] nvtini_dbflags : 0
[nvautoconf] nvtini_ring_sim: 0
[nvautoconf] nvtini_stocode : 0
[nvautoconf] nvtini_autorun : 0
[nvautoconf] nvtini_checktime:0
[nvautoconf] nvtini_debugger: 0
[nvautoconf] nvtini_devloop : 0
[nvautoconf] nvtini_deb_ident:0
[nvautoconf] nvtini_firsttime:0
[nvautoconf] nvtini_viewcode: 0
[nvautoconf] nvtini_win     : 0
[nvautoconf]
[nvautoconf] nvtini_f1      : 0
[nvautoconf] nvtini_f2      : 0
[nvautoconf] nvtini_f3      : 0
[nvautoconf] nvtini_f4      : 0
[nvautoconf] nvtini_f5      : 0
[nvautoconf] nvtini_f6      : 0
[nvautoconf] nvtini_f7      : 0
[nvautoconf] nvtini_f8      : 0
[nvautoconf] nvtini_f9      : 0
[nvautoconf] nvtini_sn1     :
[nvautoconf] nvtini_sn2     :
[nvautoconf] nvtini_sn3     :
[nvautoconf]
[nvautoconf] nvt_hseconds   : 00
[nvautoconf] nvt_seconds    : 14
[nvautoconf] nvt_minutes    : 42
[nvautoconf] nvt_hours      : 01
[nvautoconf] nvt_wday       : 1
[nvautoconf] nvt_yday       : 136
[nvautoconf] nvt_day        : 16
[nvautoconf] nvt_month      : 05
[nvautoconf] nvt_year       : 2011
[nvautoconf] nvt_time       : 01:42
[nvautoconf] nvt_date       : 16.05
[nvautoconf]
[nvautoconf] nvt_ext_phone  : 1100
[nvautoconf] nvt_int_phone  : 1010
[nvautoconf] nvt_phone_type : 0
[nvautoconf] nvtini_linegrp : 19
[nvautoconf] nvt_own_phone  : 1010
[nvautoconf]
[nvautoconf] nvt_call_id    :
[nvautoconf] nvt_call_name  :
[nvautoconf] nvt_call_ref   :
[nvautoconf] nvt_call_prev  :
[nvautoconf] nvt_call_client:
[nvautoconf] nvt_week       : 20
[nvautoconf]
[nvautoconf] key1           :
[nvautoconf] key2           :
[nvautoconf] key3           :
[nvautoconf] key4           :
[nvautoconf] key5           :
[nvautoconf] key6           :
[nvautoconf] key7           :
[nvautoconf] key8           :
[nvautoconf] key9           :
[nvautoconf]
[nvautoconf] nvt_fname1     :
[nvautoconf] nvt_fname2     :
[nvautoconf] nvt_fname3     :
[nvautoconf] nvt_fname4     :
[nvautoconf] nvt_fname5     :
[nvautoconf] nvt_fname6     :
[nvautoconf] nvt_fname7     :
[nvautoconf] nvt_fname8     :
[nvautoconf] nvt_fname9     :
[nvautoconf] nvt_fname10    :
[nvautoconf]
[nvautoconf] nvtini_lg3     :
[nvautoconf] nvtini_lg4     :
[nvautoconf] nvtini_lg5     :
[nvautoconf] nvtini_lg6     :
[nvautoconf] nvtini_lg7     :
[nvautoconf] nvtini_lg8     :
[nvautoconf] nvtini_lg9     :
[nvautoconf] nvtini_lg10    :
[nvautoconf]
[nvautoconf] nvt_net_path   :
[nvautoconf] nvt_data_path  :
[nvautoconf] nvt_vox_path   :
[nvautoconf] nvt_duration   : 0
[nvautoconf] nvt_debug      : 0
[nvautoconf]
[nvautoconf] nvt_ip_addr1   :
[nvautoconf] nvt_ip_addr2   :
[nvautoconf] nvt_ip_addr3   :
[nvautoconf] nvt_ip_addr4   :
[nvautoconf] nvt_ip_addr5   :
[nvautoconf] nvt_port_addr1 :
[nvautoconf] nvt_port_addr2 :
[nvautoconf] nvt_port_addr3 :
[nvautoconf] nvt_port_addr4 :
[nvautoconf] nvt_port_addr5 :
[nvautoconf]
[nvautoconf] nvt_anc_path   :
[nvautoconf] nvt_anc_line   :
[nvautoconf] nvt_progname1  :
[nvautoconf] nvt_progname2  :
[nvautoconf] nvt_progname3  :
[nvautoconf] nvt_progname4  :
[nvautoconf] nvt_progname5  :
[nvautoconf] nvt_progname6  :
[nvautoconf] nvt_taximpulse : 0
[nvautoconf] nvt_st         :
[nvautoconf]
[nvautoconf] nvtini_s1:  User1100lang Vor
[nvautoconf] nvtini_s2:  1010
[nvautoconf] nvtini_s3:  4DD064D6
[nvautoconf] nvtini_s4:
[nvautoconf] nvtini_s5:
[nvautoconf] nvtini_s6:  1010
[nvautoconf] nvtini_s7:
[nvautoconf] nvtini_s8:
[nvautoconf] nvtini_s9:
[nvautoconf] nvtini_s10:
[nvautoconf] nvtini_s11:
[nvautoconf] nvtini_s12:
[nvautoconf] nvtini_s13:
[nvautoconf] nvtini_s14:
[nvautoconf] nvtini_s15:
[nvautoconf] nvtini_s16:
[nvautoconf] nvtini_s17:
[nvautoconf] nvtini_s18:
[nvautoconf] nvtini_s19:
[nvautoconf] nvtini_s20:
[nvautoconf]
[nvautoconf] nvtini_i1:  1010
[nvautoconf] nvtini_i2:  0
[nvautoconf] nvtini_i3:  19
[nvautoconf] nvtini_i4:  0
[nvautoconf] nvtini_i5:  0
[nvautoconf] nvtini_i6:  0
[nvautoconf] nvtini_i7:  0
[nvautoconf] nvtini_i8:  0
[nvautoconf] nvtini_i9:  0
[nvautoconf] nvtini_i10: 0
[nvautoconf] nvtini_i11: 0
[nvautoconf] nvtini_i12: 0
[nvautoconf] nvtini_i13: 0
[nvautoconf] nvtini_i14: 0
[nvautoconf] nvtini_i15: 0
[nvautoconf] nvtini_i16: 0
[nvautoconf] nvtini_i17: 0
[nvautoconf] nvtini_i18: 0
[nvautoconf] nvtini_i19: 0
[nvautoconf] nvtini_i20: 0
[nvautoconf]
[nvautoconf] nvt_i1_x:   0
[nvautoconf] nvt_i2_x:   0
[nvautoconf] nvt_i3_x:   0
[nvautoconf] nvt_i4_x:   0
[nvautoconf] nvt_i5_x:   0
[nvautoconf] nvt_i6_x:   0
[nvautoconf] nvt_i7_x:   0
[nvautoconf] nvt_i8_x:   0
[nvautoconf] nvt_i9_x:   0
[nvautoconf]
[nvautoconf] nvt_s1_x:
[nvautoconf] nvt_s2_x:
[nvautoconf] nvt_s3_x:
[nvautoconf] nvt_s4_x:
[nvautoconf] nvt_s5_x:
[nvautoconf] nvt_s6_x:
[nvautoconf] nvt_s7_x:
[nvautoconf] nvt_s8_x:
[nvautoconf] nvt_s9_x:
free code for nvautoconf
[nvastart] Schedule function acitve: 0
[nvastart] Language for incoming entry: DE
[nvastart] Set lg1 directory to language: DE
[nvastart] German -> Set to dtvox
[nvastart] Status of mailbox 1010 is : 92
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1010
[nvawhitelist] No whitelist for alarm-in 1010
free code for nvawhitelist
[nvastart] In-Type of mailbox 1010 is : 0
-load code from file <nvasetlg.nve>  - 165 instructions, version: 6.0

[nvasetlg] Start of module [nvasetlg]
[nvasetlg] Check for other language dir for key: 1010
free code for nvasetlg
[nvastart] Specified alarm for CLI 1100 =
[nvastart] process cmd: nve nvasql_incoming 1 -s21010 -s34DD064D6 -s41100 -s5Use
r1100lang Vor -i11010 -i20 -i319 -i47509 -i50 -i90
[nvastart] Distribution with alarmkey: 7509
-load code from file <nvadist.nve>  - 4182 instructions, version: 6.0

[nvadist] Start of module [nvadist]
-load code from file <nvawhitelist.nve>  - 792 instructions, version: 6.0

[nvawhitelist] Start of module [nvawhitelist]
[nvawhitelist] Check whitelist for alarm-in 1010
[nvawhitelist] No whitelist for alarm-in 1010
free code for nvawhitelist
[nvadist] Record alarmmessage: 1
[nvadist] Module: CAPI
[nvadist] Set record before launch to 1 because of CAPI
[nvadist] Record messsage before launching alarm: 1
[nvadist] Start call back to play recorded message: 1
[nvadist] Play voxfile v1010_1.vox of alarm-in box
file d:\dbv1\v1010_1.wav not found
file d:\dbv1\vm1010_1.wav not found
[nvadist] No message found for the alarm-in key: 1010
file d:\dbv1\v101x_1.wav not found
file d:\dbv1\v10xx_1.wav not found
[nvadist] Alarmin message v10xx_1.vox was not found
file d:\dbv1\v1xxx_1.wav not found
[nvadist] Play  please speak after the beep as default -> no alarmmessage found
play \dtvox\nvadist.wav (wave): 8 seconds: ...play= \dtvox\nvadist.wav[0] ... st
d
  6..done playin  5[nvadist] Start recordig filename before launching alarm :4DD
064D6.wav  for max. 600 1/10 sec
play d:\dtvox\peepton.wav (wave): 0 seconds: ...play= d:\dtvox\peepton.wav[0] ..
. std
..done playin  0record wave: q: 3> recording d:\dbv1\4dd064d6.wav... 61/  7 disc
 info indication (4)

m_InterruptConnection 1

m_DisconnectB3Indication

m_DisconnectB3ConfirmationBad [7901]

Call disconnected (00007901)

 caller disconnected
Fastbusy detected
[nvadist] Check if recorded alarmmessage size is larger then: 5000
[nvadist] Current size of file 4DD064D6.wav :61952
-load code from file <nvasetlaunchedby.nve>  - 192 instructions, version: 6.0

[nvasetlaunchedby] Caller 1100 has launched alarm
[nvasetlaunchedby] No SIP call -> add full caller name to launched by
[nvasetlaunchedby] Launched by: Tel_1100-User1100lang_Vor
free code for nvasetlaunchedby
[nvadist] Start alarm for key 7509 with filename 4DD064D6.wav
[nvadist] start cmd: nvadist.bat 7509 4DD064D6 4DD064D6.wav "Tel_1100-User1100la
ng_Vor" 1010
 maxwait: 1 sec.. exited (0)
[nvadist] st: 0
 maxwait: 1 sec.. exited (110)
[nvadist] st: 0
[nvadist] Alarm was launched  Thanks for useing New Voice Alarm
 caller disconnected
Fastbusy detected
wrj-hangup: rc=1 Cleanup(0..318) (EXIT TO MAIN)nvt return status: 19no client sp
ecific endup routine
[16.05 01:42:36]


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [16.05 01:42:36]
job-program nvplaywav posted from line 1 founds1: 1100, s2: d:\dbv1\.\4DD064D6.w
av, s3: , s4: i1= 0, i2= 0, i3= 0, i4= 0Initializing from d:\nvt\.\nvtbatch, rec
ord 19
lg1=  d:\dtvox\           , lg2=  d:\gbvox\
db1=  d:\db1\             , dbv1= d:\dbv1\
s1:                       , s2:
s3:                       , s4:
i1=   0     , i2=   0     , i3=   0     , i4=   0
inibase...
ini-base not present.
done

19 now dial the application on line 19    1answer call...
[16.05 01:42:36]
-load code from file <d:\nvt\.\nvplaywav.nve>  - 1061 instructions, version: 6.0


[d:\nvt\.\nvplaywav] Start of module [nvplaywav.nvt]
[d:\nvt\.\nvplaywav] Number of rings: 8
[d:\nvt\.\nvplaywav] Play wav async: 0
[d:\nvt\.\nvplaywav] Log file: d:\nvt\log\.\4DD064D6.log
Warning: offhook not possible[d:\nvt\.\nvplaywav] Dial number: 1100 ownphone:
capi_MakeCall: initiating call to 1100
wait for signal...done
>e1-outdialing 1100 [00008D01]...ignoring <ECMA RO_CALLED_NAME> facility.
..alerting event..     7  8

