Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Users\nextira>d:

D:\>cd nvt

D:\nvt>nve nv_sql_alarm_start 1
New Voice Tool  /  New Voice Mail   [7.5.0 build 4062]
nvt-initialisation through database D:\nvt.\nvtini.dbf, using line 1
Initializing from D:\nvt.\nvtini.dbf, record 1
lg1=  d:\dtvox\           , lg2=  d:\gbvox\
db1=  d:\db1\             , dbv1= d:\dbv1\
s1:                       , s2:
s3:                       , s4:
i1=   0     , i2=   0     , i3=   0     , i4=   0
inibase...
ini-base not present.
done
;;open channel... done
Line 1 started
voicemail-support through <d:\db1\vm001>

program <nv_sql_alarm_start> as primary startup


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [30.08 14:39:05]
- nve - Incoming call from []

[30.08 14:39:05]
-load code from file <nv_sql_alarm_start.nve>  - 5625 instructions, version: 6.0


[nv_sql_alarm_start] Module name in s1:
[nv_sql_alarm_start] Start of module [nv_sql_alarm_start]
[nv_sql_alarm_start] Trace level in i9: 0
[nv_sql_alarm_start]
[nv_sql_alarm_start] -------------------------------------------------- INIT
[nv_sql_alarm_start] WindowTitle=GLT_NOEL
[nv_sql_alarm_start] DsnName=GLTEVENT
[nv_sql_alarm_start] DatabaseTable=EventLog
[nv_sql_alarm_start] DatabaseUser=MOBICALL
[nv_sql_alarm_start] DatabasePassword=NVM
[nv_sql_alarm_start] MaxConnectionRetries=5
[nv_sql_alarm_start] MaxConnectionRetries: 5
[nv_sql_alarm_start] StartAlarmOnError=6110
[nv_sql_alarm_start] StartAlarmOnError: 6110
[nv_sql_alarm_start] DefaultAlarmNumber=6100
[nv_sql_alarm_start] DefaultAlarmNumber: 6100
[nv_sql_alarm_start] CheckForEntriesAllSec=5
[nv_sql_alarm_start] CheckForEntriesAllSec: 5
[nv_sql_alarm_start] SqlSelectCommand=SELECT * FROM EventLog WHERE ChangeMask=1
[nv_sql_alarm_start] UseAlarmRefAsJobId=1
[nv_sql_alarm_start] UseAlarmRefAsJobId: 1
[nv_sql_alarm_start] SuperviseModeWaitSecBeforeChekingStatus=10
[nv_sql_alarm_start] SuperviseModeWaitSecBeforeChekingStatus: 10
[nv_sql_alarm_start] JobId=Node
[nv_sql_alarm_start] MessageText=Expanded ID
[nv_sql_alarm_start] DisplayMessage1=
[nv_sql_alarm_start] DisplayMessage2 set to
[nv_sql_alarm_start] AlarmNumber=
[nv_sql_alarm_start] AlarmType=
[nv_sql_alarm_start] AlarmName=
[nv_sql_alarm_start] AlarmGroup=
[nv_sql_alarm_start] AlarmWavFile=
[nv_sql_alarm_start] AlarmWavPath=
[nv_sql_alarm_start] AttachmentFile=
[nv_sql_alarm_start] AlarmOffset=
[nv_sql_alarm_start] AlarmReference=Node
[nv_sql_alarm_start] AlarmStatus=ChangeMask
[nv_sql_alarm_start] JobIdFieldTypeIsChar=0
[nv_sql_alarm_start] JobIdFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmTypeFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmTypeFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmGroupFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmGroupFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmOffsetFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmOffsetFieldTypeIsChar: 0
[nv_sql_alarm_start] StatusRunning=2
[nv_sql_alarm_start] StatusError=9
[nv_sql_alarm_start] StatusCancelled=8
[nv_sql_alarm_start] --------------------------------------------------END INIT
[nv_sql_alarm_start]
[nv_sql_alarm_start] Start SQL alarm start module
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
SQLError: S1009
Msg: [Microsoft][ODBC Microsoft Access Driver] '(unbekannt)' ist kein zulässiger
 Pfad. Stellen Sie sicher, dass der Pfad richtig eingegeben wurde und dass Sie m
it dem Server, auf dem sich die Datei befindet, verbunden sind.
datasource GLTEVENT not found or locked by another user.
please check your user id (MOBICALL) and password and
please check your ODBC32 configuration and external users
[nv_sql_alarm_start] Failed to connect to database: GLTEVENT retries: 0
[nv_sql_alarm_start] Wait 10 seconds before retry
SQLError: S1009
Msg: [Microsoft][ODBC Microsoft Access Driver] '(unbekannt)' ist kein zulässiger
 Pfad. Stellen Sie sicher, dass der Pfad richtig eingegeben wurde und dass Sie m
it dem Server, auf dem sich die Datei befindet, verbunden sind.
datasource GLTEVENT not found or locked by another user.
please check your user id (MOBICALL) and password and
please check your ODBC32 configuration and external users
[nv_sql_alarm_start] Failed to connect to database: GLTEVENT retries: 1
[nv_sql_alarm_start] Wait 10 seconds before retry
SQLError: S1009
Msg: [Microsoft][ODBC Microsoft Access Driver] '(unbekannt)' ist kein zulässiger
 Pfad. Stellen Sie sicher, dass der Pfad richtig eingegeben wurde und dass Sie m
it dem Server, auf dem sich die Datei befindet, verbunden sind.
datasource GLTEVENT not found or locked by another user.
please check your user id (MOBICALL) and password and
please check your ODBC32 configuration and external users
[nv_sql_alarm_start] Failed to connect to database: GLTEVENT retries: 2
[nv_sql_alarm_start] Wait 10 seconds before retry
^C
D:\nvt>nve nv_sql_alarm_start 1
New Voice Tool  /  New Voice Mail   [7.5.0 build 4062]
nvt-initialisation through database D:\nvt.\nvtini.dbf, using line 1
Initializing from D:\nvt.\nvtini.dbf, record 1
lg1=  d:\dtvox\           , lg2=  d:\gbvox\
db1=  d:\db1\             , dbv1= d:\dbv1\
s1:                       , s2:
s3:                       , s4:
i1=   0     , i2=   0     , i3=   0     , i4=   0
inibase...
ini-base not present.
done
;;open channel... done
Line 1 started
voicemail-support through <d:\db1\vm001>

program <nv_sql_alarm_start> as primary startup


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [30.08 14:40:34]
- nve - Incoming call from []

[30.08 14:40:34]
-load code from file <nv_sql_alarm_start.nve>  - 5625 instructions, version: 6.0


[nv_sql_alarm_start] Module name in s1:
[nv_sql_alarm_start] Start of module [nv_sql_alarm_start]
[nv_sql_alarm_start] Trace level in i9: 0
[nv_sql_alarm_start]
[nv_sql_alarm_start] -------------------------------------------------- INIT
[nv_sql_alarm_start] WindowTitle=GLT_NOEL
[nv_sql_alarm_start] DsnName=GLTEVENT
[nv_sql_alarm_start] DatabaseTable=EventLog
[nv_sql_alarm_start] DatabaseUser=MOBICALL
[nv_sql_alarm_start] DatabasePassword=NVM
[nv_sql_alarm_start] MaxConnectionRetries=5
[nv_sql_alarm_start] MaxConnectionRetries: 5
[nv_sql_alarm_start] StartAlarmOnError=6110
[nv_sql_alarm_start] StartAlarmOnError: 6110
[nv_sql_alarm_start] DefaultAlarmNumber=6100
[nv_sql_alarm_start] DefaultAlarmNumber: 6100
[nv_sql_alarm_start] CheckForEntriesAllSec=5
[nv_sql_alarm_start] CheckForEntriesAllSec: 5
[nv_sql_alarm_start] SqlSelectCommand=SELECT * FROM EventLog WHERE ChangeMask=1
[nv_sql_alarm_start] UseAlarmRefAsJobId=1
[nv_sql_alarm_start] UseAlarmRefAsJobId: 1
[nv_sql_alarm_start] SuperviseModeWaitSecBeforeChekingStatus=10
[nv_sql_alarm_start] SuperviseModeWaitSecBeforeChekingStatus: 10
[nv_sql_alarm_start] JobId=Node
[nv_sql_alarm_start] MessageText=Expanded ID
[nv_sql_alarm_start] DisplayMessage1=
[nv_sql_alarm_start] DisplayMessage2 set to
[nv_sql_alarm_start] AlarmNumber=
[nv_sql_alarm_start] AlarmType=
[nv_sql_alarm_start] AlarmName=
[nv_sql_alarm_start] AlarmGroup=
[nv_sql_alarm_start] AlarmWavFile=
[nv_sql_alarm_start] AlarmWavPath=
[nv_sql_alarm_start] AttachmentFile=
[nv_sql_alarm_start] AlarmOffset=
[nv_sql_alarm_start] AlarmReference=Node
[nv_sql_alarm_start] AlarmStatus=ChangeMask
[nv_sql_alarm_start] JobIdFieldTypeIsChar=0
[nv_sql_alarm_start] JobIdFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmTypeFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmTypeFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmGroupFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmGroupFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmOffsetFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmOffsetFieldTypeIsChar: 0
[nv_sql_alarm_start] StatusRunning=2
[nv_sql_alarm_start] StatusError=9
[nv_sql_alarm_start] StatusCancelled=8
[nv_sql_alarm_start] --------------------------------------------------END INIT
[nv_sql_alarm_start]
[nv_sql_alarm_start] Start SQL alarm start module
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table














please check your user id (MOBICALL) and password and
please check your ODBC32 configuration and external users
[nv_sql_alarm_start] Failed to connect to database: GLTEVENT retries: 2
[nv_sql_alarm_start] Wait 10 seconds before retry
^C
D:\nvt>nve nv_sql_alarm_start 1
New Voice Tool  /  New Voice Mail   [7.5.0 build 4062]
nvt-initialisation through database D:\nvt.\nvtini.dbf, using line 1
Initializing from D:\nvt.\nvtini.dbf, record 1
lg1=  d:\dtvox\           , lg2=  d:\gbvox\
db1=  d:\db1\             , dbv1= d:\dbv1\
s1:                       , s2:
s3:                       , s4:
i1=   0     , i2=   0     , i3=   0     , i4=   0
inibase...
ini-base not present.
done
;;open channel... done
Line 1 started
voicemail-support through <d:\db1\vm001>

program <nv_sql_alarm_start> as primary startup


NVT Optimizing 1-Pass Compiler/Interpreter 7.5 -- [30.08 14:40:34]
- nve - Incoming call from []

[30.08 14:40:34]
-load code from file <nv_sql_alarm_start.nve>  - 5625 instructions, version: 6.0


[nv_sql_alarm_start] Module name in s1:
[nv_sql_alarm_start] Start of module [nv_sql_alarm_start]
[nv_sql_alarm_start] Trace level in i9: 0
[nv_sql_alarm_start]
[nv_sql_alarm_start] -------------------------------------------------- INIT
[nv_sql_alarm_start] WindowTitle=GLT_NOEL
[nv_sql_alarm_start] DsnName=GLTEVENT
[nv_sql_alarm_start] DatabaseTable=EventLog
[nv_sql_alarm_start] DatabaseUser=MOBICALL
[nv_sql_alarm_start] DatabasePassword=NVM
[nv_sql_alarm_start] MaxConnectionRetries=5
[nv_sql_alarm_start] MaxConnectionRetries: 5
[nv_sql_alarm_start] StartAlarmOnError=6110
[nv_sql_alarm_start] StartAlarmOnError: 6110
[nv_sql_alarm_start] DefaultAlarmNumber=6100
[nv_sql_alarm_start] DefaultAlarmNumber: 6100
[nv_sql_alarm_start] CheckForEntriesAllSec=5
[nv_sql_alarm_start] CheckForEntriesAllSec: 5
[nv_sql_alarm_start] SqlSelectCommand=SELECT * FROM EventLog WHERE ChangeMask=1
[nv_sql_alarm_start] UseAlarmRefAsJobId=1
[nv_sql_alarm_start] UseAlarmRefAsJobId: 1
[nv_sql_alarm_start] SuperviseModeWaitSecBeforeChekingStatus=10
[nv_sql_alarm_start] SuperviseModeWaitSecBeforeChekingStatus: 10
[nv_sql_alarm_start] JobId=Node
[nv_sql_alarm_start] MessageText=Expanded ID
[nv_sql_alarm_start] DisplayMessage1=
[nv_sql_alarm_start] DisplayMessage2 set to
[nv_sql_alarm_start] AlarmNumber=
[nv_sql_alarm_start] AlarmType=
[nv_sql_alarm_start] AlarmName=
[nv_sql_alarm_start] AlarmGroup=
[nv_sql_alarm_start] AlarmWavFile=
[nv_sql_alarm_start] AlarmWavPath=
[nv_sql_alarm_start] AttachmentFile=
[nv_sql_alarm_start] AlarmOffset=
[nv_sql_alarm_start] AlarmReference=Node
[nv_sql_alarm_start] AlarmStatus=ChangeMask
[nv_sql_alarm_start] JobIdFieldTypeIsChar=0
[nv_sql_alarm_start] JobIdFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmTypeFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmTypeFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmGroupFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmGroupFieldTypeIsChar: 0
[nv_sql_alarm_start] AlarmOffsetFieldTypeIsChar=0
[nv_sql_alarm_start] AlarmOffsetFieldTypeIsChar: 0
[nv_sql_alarm_start] StatusRunning=2
[nv_sql_alarm_start] StatusError=9
[nv_sql_alarm_start] StatusCancelled=8
[nv_sql_alarm_start] --------------------------------------------------END INIT
[nv_sql_alarm_start]
[nv_sql_alarm_start] Start SQL alarm start module
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] Wait for 10 seconds before checking alarm status
[nv_sql_alarm_start] Read status after delay: ?
[nv_sql_alarm_start] Write alarm reference to ID field: Node
[nv_sql_alarm_start] Use alarm reference: 4E5CDACB
[nv_sql_alarm_start] Write alarm reference: 4E5CDACB as ID
[nv_sql_alarm_start] Found new alarm with ID: 4E5CDACB name:0  type:
[nv_sql_alarm_start] Write text message:Alarmweiterleitung Test
-load code from file <nvawritelogsections.nve>  - 315 instructions, version: 6.0


[nvawritelogsections] Done writing sections to empty log file
free code for nvawritelogsections
[nv_sql_alarm_start] No alarm name read
[nv_sql_alarm_start] No alarm number specified to start -> Use default alarm: 61
00
part to replace < > not foundstringlength is / are too short[nv_sql_alarm_start]
 Start new alarm 6100 with command: nvarun.cmd 6100 4E5CDACB 0 SQL-Alarm_ID4E5CD
ACB alr 0 0
 maxwait: 1 sec.. exited (0)
[nv_sql_alarm_start] Update status for job to: 2 for ID:4E5CDACB
[nv_sql_alarm_start]
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table
[nv_sql_alarm_start] Connect to database with DSN: GLTEVENT
[nv_sql_alarm_start] User: MOBICALL and Password: NVM
datasource GLTEVENT located for user [MOBICALL] (use odbcsel to select a table)
[nv_sql_alarm_start] Successfully connected to database
[nv_sql_alarm_start] Select table: EventLog SQL Command: SELECT * FROM EventLog
WHERE ChangeMask=1
Table 'EventLog' selected.
[nv_sql_alarm_start] No entries found with status new alarm
[nv_sql_alarm_start] No new alarm waiting in SQL table